Merge remote-tracking branch 'github/master' into debian/bookworm

README.md

@@ -11,5 +11,5 @@ To reset the bootloader back to factory defaults use [Raspberry Pi Imager](https
 * [Config.txt boot options](https://www.raspberrypi.com/documentation/computers/config_txt.html#boot-options)
 * [Bootloader EEPROM](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-boot-eeprom)
 * [Bootloader configuration](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-bootloader-configuration)
-* [Updating the Compute Module 4 bootloader](https://www.raspberrypi.com/documentation/computers/compute-module.html#cm4bootloader)
+* [Updating the Compute Module 4 bootloader](https://www.raspberrypi.com/documentation/computers/compute-module.html#update-the-compute-module-bootloader)
 * [Releases and release notes](releases.md)

firmware-2711/release-notes.md

@@ -1,5 +1,13 @@
 # Raspberry Pi4 bootloader EEPROM release notes
 
+## 2024-09-05: Fix self-update if EEPROM is write-protected (latest)
+* arm_dt: Consult the hat_map for all HATs
+* USB boot - ignore RP2 / RP3 MSD device in BOOTSEL mode.
+* recovery.bin - Fix erase_eeprom to not block reboot_recovery
+* Fix self-update to continue to boot instead of retrying forever
+  if the EEPROM is write protected.
+  https://github.com/raspberrypi/rpi-eeprom/issues/597
+
 ## 2024-08-14 (recovery.bin) -  Add support for OTP metadata (latest)
 * Update to recovery.bin to output metadata about OTP during rpiboot
 

firmware-2712/release-notes.md

@@ -1,5 +1,19 @@
 # Raspberry Pi5 bootloader EEPROM release notes
 
+## 2024-09-11: Promote 2024-10-09 release (default) (automatic update)
+
+## 2024-09-10: Fix lockup on 7" DSI panel clones (latest)
+* Fix lockup regression with some 3rd party 7" DSI panels
+  See: https://github.com/raspberrypi/linux/issues/6341
+
+## 2024-09-05: Fix self-update if EEPROM is write-protected  (latest)
+* arm_dt: Consult the hat_map for all HATs
+* USB boot - ignore RP2 / RP3 MSD device in BOOTSEL mode.
+* recovery.bin - Fix erase_eeprom to not block reboot_recovery
+* Fix self-update to continue to boot instead of retrying forever
+  if the EEPROM is write protected.
+  https://github.com/raspberrypi/rpi-eeprom/issues/597
+
 ## 2024-07-30: Promote the 2024-07-30 release to default (default)
 
 ## 2024-08-14 - (recovery.bin) Add support for OTP metadata (latest)
@@ -11,8 +25,8 @@
     https://github.com/raspberrypi/rpi-eeprom/issues/527
 * Add enable_rp1_uart=1 to config.txt to initialise RP1 UART0 immediately
   prior to starting the ARMs get earlycon on 40-pin header (pins 14,15)
-  Also requires pciex4_reset=0 in config.txt
-  earlycon=pl011,0x1f00030000,115200n8
+  Also requires pciex4_reset=0 in config.txt, and
+  earlycon=pl011,0x1f00030000,115200n8 in cmdline.txt
 
 ## 2024-07-25: Support CM4 nEXTRST on CM5 (latest)
 * Drive nEXTRST on CM5 for CM4IO compatibility.
@@ -26,8 +40,8 @@
 ## 2024-06-04: Fix [pi5] config.txt conditional state (latest)
 * The [pi5] conditional statement should apply to the entire pi5
   family i.e. include cm5 as well.
-* Bump SDIO bus priorities to that a GPU/RAM intensive processes
-  can't unnecessarily stall an I/O processes.
+* Bump SDIO bus priorities so that a GPU/RAM intensive process
+  can't unnecessarily stall I/O.
 * Assorted log message tidyups.
 
 ## 2024-05-17: Ignore bootloader updates for Pi5 on Pi4 - (latest)

imager/make-imager-release

@@ -8,4 +8,4 @@ script_dir=$(cd "$(dirname "$0")" && pwd)
 ${script_dir}/make-release critical 2023-01-11 000138c0 "${script_dir}/2711-config" release-2711 rpi-boot-eeprom-recovery 2711
 
 # Pi5
-${script_dir}/make-release critical 2024-06-05 "" "${script_dir}/2712-config" release-2712 rpi-boot-eeprom-recovery 2712
+${script_dir}/make-release critical 2024-07-30 "" "${script_dir}/2712-config" release-2712 rpi-boot-eeprom-recovery 2712

rpi-eeprom-update

@@ -403,7 +403,7 @@ checkDependencies() {
    elif [ $(((0x$BOARD_INFO >> 12) & 15)) = 4 ]; then
       BCM_CHIP=2712
       EEPROM_SIZE=2097152
-      BOOTLOADER_AUTO_UPDATE_MIN_VERSION="${BOOTLOADER_AUTO_UPDATE_MIN_VERSION:-1713610410}"
+      BOOTLOADER_AUTO_UPDATE_MIN_VERSION="${BOOTLOADER_AUTO_UPDATE_MIN_VERSION:-1725975630}"
       SPIDEV=/dev/spidev10.0
       # Default is to use flashrom if availableon BCM2712
       RPI_EEPROM_USE_FLASHROM=${RPI_EEPROM_USE_FLASHROM:-1}