pieeprom-2025-01-06: 2712: Stop the fan after fan-probe (latest)

Browse Source

* Stop the fan after after fan-probe
  After the fan-probe has completed drive the fan PWM GPIO
  to high if a fan was detected and let the OS take over.
* Add SD_QUIRKS for hardware bringup / workarounds
  Add a new SD_QUIRKS flags property which can be used to
  disable high-speed mode (bit 0). Other bits are reserved for
  future use.
* Change uart_2ndstage default to 1 on Pi5
  Change the default to 1 because this gives useful diagnostics
  for device-tree loading with minimal overhead. Set uart_2ndstage=0
  or BOOT_UART=0 to disable this.
* Move M.2 HAT+ detection to early boot.
  Initialse M.2 HAT+ detection before DDR init to give NVMe
  drive firmware more time to boot.

...

This commit is contained in:

Tim Gover

2025-01-06 17:07:57 +00:00

committed by timg236

parent f02f0eaf4e

commit 888e374d47

3 changed files with 17 additions and 0 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download Patch File Download Diff File Expand all files Collapse all files

BIN

firmware-2712/latest/recovery.bin

Binary file not shown.