scripts: Add support for chip-specific firmware directories

BCM2711 and BCM2712 require different EEPROM firmware and
consequently the binaries have been moved to chip specific
firmware directories.

firmware-2711 / firmware-2712

imager/2712-config/boot-conf-default.txt

@@ -0,0 +1,4 @@
+[all]
+BOOT_UART=1
+BOOT_ORDER=0xf41
+POWER_OFF_ON_HALT=0

imager/2712-config/boot-conf-network.txt

@@ -0,0 +1,5 @@
+[all]
+BOOT_UART=1
+BOOT_ORDER=0xf21
+POWER_OFF_ON_HALT=0
+

imager/2712-config/boot-conf-sd.txt

@@ -0,0 +1,4 @@
+[all]
+BOOT_UART=1
+BOOT_ORDER=0xf41
+POWER_OFF_ON_HALT=0

imager/2712-config/boot-conf-usb.txt

@@ -0,0 +1,5 @@
+[all]
+BOOT_UART=1
+BOOT_ORDER=0xf14
+POWER_OFF_ON_HALT=0
+

imager/make-beta-release

@@ -1,13 +0,0 @@
-#!/bin/sh
-
-set -e
-
-script_dir=$(cd "$(dirname "$0")" && pwd)
-
-firmware_status=${firmware_status:-"beta"}
-firmware_dir=${script_dir}/../firmware/${firmware_status}
-pieeprom_version=$(basename $(ls ${firmware_dir}/pieeprom-*.bin | sort -V | tail -1) .bin | cut -d- -f2-5)
-vl805_version=$(basename $(ls ${firmware_dir}/vl805-*.bin | sort -V | tail -1) .bin | cut -d- -f2)
-
-${script_dir}/make-release ${firmware_status} ${pieeprom_version} ${vl805_version} "${script_dir}" ${firmware_status}_release rpi-boot-eeprom-recovery-${firmware_status}
-

imager/make-imager-release

@@ -4,4 +4,8 @@ set -e
 
 script_dir=$(cd "$(dirname "$0")" && pwd)
 
-${script_dir}/make-release critical 2023-01-11 000138c0 "${script_dir}" release rpi-boot-eeprom-recovery
+# Pi4, Pi400, CM4, CM4-S
+${script_dir}/make-release critical 2023-01-11 000138c0 "${script_dir}/2711-config" release-2711 rpi-boot-eeprom-recovery 2711
+
+# Pi5
+${script_dir}/make-release critical 2023-09-21 "" "${script_dir}/2712-config" release-2712 rpi-boot-eeprom-recovery 2712

imager/make-release

@@ -32,8 +32,10 @@ gen_release() {
       cd "${tmp_dir}"
       cp "${script_dir}/README.txt" .
       cp "${firmware_dir}/recovery.bin" .
+      if [ ${bcm_chip} = 2711 ]; then
          cp "${firmware_dir}/vl805-${vl805_version}.bin" vl805.bin
          sha256sum vl805.bin | awk '{print $1}' > vl805.sig
+      fi
 
       "${script_dir}/../rpi-eeprom-config" \
          --config "${config}" --out pieeprom.bin \
@@ -61,20 +63,26 @@ vl805_version="${3}"
 config_dir="${4}"
 output_dir="${5}"
 output_basename="${6}"
+bcm_chip="${7}"
 
 [ -n "${firmware_status}" ] || usage
 [ -n "${pieeprom_version}" ] || usage
-[ -n "${vl805_version}" ] || usage
 [ -n "${config_dir}" ] || usage
 [ -n "${output_dir}" ] || usage
 [ -n "${output_basename}" ] || usage
+[ -n "${bcm_chip}" ] || usage
 
-firmware_dir=${script_dir}/../firmware/${firmware_status}
+firmware_dir=${script_dir}/../firmware-${bcm_chip}/${firmware_status}
 [ -d "${firmware_dir}" ] || (echo "${firmware_dir} doesn't exist" && exit 1)
 [ -f "${firmware_dir}/pieeprom-${pieeprom_version}.bin" ] || (echo "${firmware_status}/pieeprom-${pieeprom_version}.bin doesn't exist" && exit 1)
-[ -f "${firmware_dir}/vl805-${vl805_version}.bin" ] || (echo "${firmware_status}/vl805-${vl805_version}.bin doesn't exist" && exit 1)
-[ -d "${config_dir}" ] || (echo "${config_dir} doesn't exist" && exit 1)
-tag="${pieeprom_version}-vl805-${vl805_version}"
+
+if [ "${bcm_chip}" = 2711 ]; then
+   [ -f "${firmware_dir}/vl805-${vl805_version}.bin" ] || (echo "${firmware_status}/vl805-${vl805_version}.bin doesn't exist" && exit 1)
+   [ -d "${config_dir}" ] || (echo "${config_dir} doesn't exist" && exit 1)
+   tag="${pieeprom_version}-vl805-${vl805_version}"
+else
+   tag="${pieeprom_version}"
+fi
 # use realpath to ensure paths are absolute
 config_dir=$(realpath "${config_dir}")
 output_dir=$(realpath "${output_dir}")

releases.md

@@ -1,12 +1,13 @@
-# Raspberry Pi 4B, 400 and CM4 bootloader EEPROM releases
-This page provides links to the production and development release images for the bootloader EEPROM on BCM2711-based Raspberry Pi computers. Normally, the 
+# Raspberry Pi 4 and Raspberry Pi 5 bootloader EEPROM releases.
+This page provides links to the production and development release images for the bootloader EEPROM on BCM2711 and BCM2712 based Raspberry Pi computers. Normally, the 
 bootloader is automatically updated after an APT update via the [rpi-eeprom-update](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#automatic-updates) utility.
 
 ## Release notes
 Release notes are available [here](https://github.com/raspberrypi/rpi-eeprom/blob/master/firmware/release-notes.md).
 
 ## Default release
-The default production EEPROM image release is [2022-11-25](https://github.com/raspberrypi/rpi-eeprom/releases/tag/v2022.11.25-138a1) and can be installed via the [Raspberry Pi Imager](https://www.raspberrypi.com/software/).
+### Raspberry Pi 4, CM4, CM4-s, Pi400
+The default production EEPROM image release is [2023-01-11](https://github.com/raspberrypi/rpi-eeprom/releases/tag/v2023.01.11-138c0) and can be installed via the [Raspberry Pi Imager](https://www.raspberrypi.com/software/).
 
 ## USB MSD boot
 Please see the [USB mass storage boot](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#usb-mass-storage-boot) guide.

rpi-eeprom-config

@@ -14,7 +14,7 @@ import sys
 import tempfile
 import time
 
-IMAGE_SIZE = 512 * 1024
+VALID_IMAGE_SIZES = [512 * 1024, 2 * 1024 * 1024]
 
 BOOTCONF_TXT = 'bootconf.txt'
 BOOTCONF_SIG = 'bootconf.sig'
@@ -55,6 +55,15 @@ def rpi4():
                 return True
     return False
 
+def rpi5():
+    compatible_path = "/sys/firmware/devicetree/base/compatible"
+    if os.path.exists(compatible_path):
+        with open(compatible_path, "rb") as f:
+            compatible = f.read().decode('utf-8')
+            if "bcm2712" in compatible:
+                return True
+    return False
+
 def exit_handler():
     """
     Delete any temporary files.
@@ -233,6 +242,7 @@ class BootloaderImage(object):
         """
         self._filename = filename
         self._sections = []
+        self._image_size = 0
         try:
             self._bytes = bytearray(open(filename, 'rb').read())
         except IOError as err:
@@ -241,9 +251,10 @@ class BootloaderImage(object):
         if output is not None:
             self._out = open(output, 'wb')
 
-        if len(self._bytes) != IMAGE_SIZE:
+        self._image_size = len(self._bytes)
+        if self._image_size not in VALID_IMAGE_SIZES:
             exit_error("%s: Expected size %d bytes actual size %d bytes" %
-                       (filename, IMAGE_SIZE, len(self._bytes)))
+                       (filename, self._image_size, len(self._bytes)))
         self.parse()
 
     def parse(self):
@@ -252,7 +263,7 @@ class BootloaderImage(object):
         """
         offset = 0
         magic = 0
-        while offset < IMAGE_SIZE:
+        while offset < self._image_size:
             magic, length = struct.unpack_from('>LL', self._bytes, offset)
             if magic == 0x0 or magic == 0xffffffff:
                 break # EOF
@@ -278,7 +289,7 @@ class BootloaderImage(object):
         length = -1
         is_last = False
 
-        next_offset = IMAGE_SIZE - ERASE_ALIGN_SIZE # Don't create padding inside the bootloader scratch page
+        next_offset = self._image_size - ERASE_ALIGN_SIZE # Don't create padding inside the bootloader scratch page
         for i in range(0, len(self._sections)):
             s = self._sections[i]
             if s.magic == FILE_MAGIC and s.filename == filename:
@@ -306,7 +317,7 @@ class BootloaderImage(object):
         hdr_offset, length, is_last, next_offset = self.find_file(dst_filename)
         update_len = len(src_bytes) + FILE_HDR_LEN
 
-        if hdr_offset + update_len > IMAGE_SIZE - ERASE_ALIGN_SIZE:
+        if hdr_offset + update_len > self._image_size - ERASE_ALIGN_SIZE:
             raise Exception('No space available - image past EOF.')
 
         if hdr_offset < 0:
@@ -406,10 +417,10 @@ class BootloaderImage(object):
 def main():
     """
     Utility for reading and writing the configuration file in the
-    Raspberry Pi 4 bootloader EEPROM image.
+    Raspberry Pi bootloader EEPROM image.
     """
     description = """\
-Bootloader EEPROM configuration tool for the Raspberry Pi 4.
+Bootloader EEPROM configuration tool for the Raspberry Pi 4 and Raspberry Pi 5.
 Operating modes:
 
 1. Outputs the current bootloader configuration to STDOUT if no arguments are
@@ -493,8 +504,8 @@ See 'rpi-eeprom-update -h' for more information about the available EEPROM image
     if (args.edit or args.apply is not None) and os.getuid() != 0:
         exit_error("--edit/--apply must be run as root")
 
-    if (args.edit or args.apply is not None) and not rpi4():
-        exit_error("--edit/--apply must run on a Raspberry Pi 4")
+    if (args.edit or args.apply is not None) and not rpi4() and not rpi5():
+        exit_error("--edit/--apply must run on a Raspberry Pi 4 or Raspberry Pi 5")
 
     if args.edit:
         edit_config(args.eeprom)

rpi-eeprom-update

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Raspberry Pi4 boot EEPROM updater.
+# Raspberry Pi bootloader EEPROM updater.
 
 set -e
 
@@ -14,8 +14,7 @@ LOCAL_MODE=0
 if [ -n "$FIRMWARE_ROOT" ]; then
    # Provided by environment
    true
-elif [ -d /lib/firmware/raspberrypi/bootloader ]; then
-   # Default firmware root exists
+elif [ -d /lib/firmware/raspberrypi/bootloader ] || [ -d /lib/firmware/raspberrypi/bootloader-2711 ] || [ -d /lib/firmware/raspberrypi/bootloader-2712 ]; then
    FIRMWARE_ROOT=/lib/firmware/raspberrypi/bootloader
 else
    # Work from local git checkout
@@ -25,10 +24,8 @@ fi
 
 # Selects the release sub-directory
 FIRMWARE_RELEASE_STATUS=${FIRMWARE_RELEASE_STATUS:-default}
-FIRMWARE_IMAGE_DIR=${FIRMWARE_IMAGE_DIR:-${FIRMWARE_ROOT}/${FIRMWARE_RELEASE_STATUS}}
 FIRMWARE_BACKUP_DIR=${FIRMWARE_BACKUP_DIR:-/var/lib/raspberrypi/bootloader/backup}
 ENABLE_VL805_UPDATES=${ENABLE_VL805_UPDATES:-1}
-RECOVERY_BIN=${RECOVERY_BIN:-${FIRMWARE_ROOT}/${FIRMWARE_RELEASE_STATUS}/recovery.bin}
 CM4_ENABLE_RPI_EEPROM_UPDATE=${CM4_ENABLE_RPI_EEPROM_UPDATE:-0}
 RPI_EEPROM_UPDATE_CONFIG_TOOL="${RPI_EEPROM_UPDATE_CONFIG_TOOL:-raspi-config}"
 
@@ -43,10 +40,6 @@ RPI_EEPROM_UPDATE_CONFIG_TOOL="${RPI_EEPROM_UPDATE_CONFIG_TOOL:-raspi-config}"
 RPI_EEPROM_SELF_UPDATE="${RPI_EEPROM_SELF_UPDATE:-0}"
 RPI_EEPROM_SELF_UPDATE_MIN_VER=1650968668
 
-# Automatic, critical updates are not applied unless the current bootloader version
-# is older than pieeprom-2020-09-03
-BOOTLOADER_AUTO_UPDATE_MIN_VERSION="${BOOTLOADER_AUTO_UPDATE_MIN_VERSION:-1599135103}"
-
 DT_BOOTLOADER_TS=${DT_BOOTLOADER_TS:-/proc/device-tree/chosen/bootloader/build-timestamp}
 
 EXIT_SUCCESS=0
@@ -63,6 +56,7 @@ EEPROM_SIZE=524288
 BOARD_INFO=
 BOARD_REVISION=
 BOARD_TYPE=
+BCM_CHIP=
 
 # Newer board revisions embed the VLI firmware in the bootloader EEPROM and
 # there is no way to separately update the VLI firmware. Consequently,
@@ -314,6 +308,11 @@ getBootloaderUpdateVersion() {
    fi
 }
 
+chipNotSupported() {
+   echo "This tool only works with Raspberry Pi4 and Rapberry Pi5"
+   exit ${EXIT_SUCCESS}
+}
+
 checkDependencies() {
 
    if [ -f "/sys/firmware/devicetree/base/system/linux,revision" ]; then
@@ -327,12 +326,32 @@ checkDependencies() {
       exit ${EXIT_SUCCESS}
    fi
 
-   if [ $(((0x$BOARD_INFO >> 23) & 1)) -eq 0 ] || [ $(((0x$BOARD_INFO >> 12) & 15)) -ne 3 ]; then
-      # Not a BCM2711, no EEPROMs to update.
-      echo "This tool only works with a Raspberry Pi 4"
-      exit ${EXIT_SUCCESS}
+   if [ $(((0x$BOARD_INFO >> 23) & 1)) = 0 ]; then
+      chipNotSupported
    fi
 
+   if [ $(((0x$BOARD_INFO >> 12) & 15)) = 3 ]; then
+      BCM_CHIP=2711
+      EEPROM_SIZE=524288
+      BOOTLOADER_AUTO_UPDATE_MIN_VERSION="${BOOTLOADER_AUTO_UPDATE_MIN_VERSION:-1599135103}"
+   elif [ $(((0x$BOARD_INFO >> 12) & 15)) = 4 ]; then
+      # BCM2712 always supports self-update so recovery.bin is only used for RPi imager
+      # bootloader updated SD cards or with RPIBOOT.
+      BCM_CHIP=2712
+      EEPROM_SIZE=2097152
+      RPI_EEPROM_SELF_UPDATE=1
+      BOOTLOADER_AUTO_UPDATE_MIN_VERSION="${BOOTLOADER_AUTO_UPDATE_MIN_VERSION:-1694601426}"
+   else
+      chipNotSupported
+   fi
+
+   FIRMWARE_IMAGE_DIR="${FIRMWARE_ROOT}-${BCM_CHIP}/${FIRMWARE_RELEASE_STATUS}"
+   if ! [ -d "${FIRMWARE_IMAGE_DIR}" ]; then
+      # Use unadorned name for backwards compatiblity
+      FIRMWARE_IMAGE_DIR="${FIRMWARE_ROOT}/${FIRMWARE_RELEASE_STATUS}"
+   fi
+   RECOVERY_BIN=${RECOVERY_BIN:-${FIRMWARE_IMAGE_DIR}/recovery.bin}
+
    BOARD_TYPE=$(((0x$BOARD_INFO >> 4) & 0xff))
    BOARD_REVISION=$((0x$BOARD_INFO & 0xf))
 
@@ -385,7 +404,7 @@ checkDependencies() {
       die "sha256sum not found. Try installing the coreutilities package."
    fi
 
-   if [ ! -f "${RECOVERY_BIN}" ]; then
+   if [ "${BCM_CHIP}" = 2711 ] && [ ! -f "${RECOVERY_BIN}" ]; then
       die "${RECOVERY_BIN} not found."
    fi
 }
@@ -394,13 +413,15 @@ usage() {
 cat <<EOF
 rpi-eeprom-update [options]... [FILE]
 
-Bootloader EEPROM update tool for the Raspberry Pi 4.
+Bootloader EEPROM update tool for the Raspberry Pi 4 and Raspberry Pi 5.
 
-Checks whether the Raspberry Pi 4 bootloader and the VL805 USB controller
-EEPROMs are up to date and optionally updates the EEPROMs at the next reboot.
+This script also updates the SPI EEPROM image for the VL805 USB HC
+firmware on early Pi4B boards where the USB firmware is stored in 
+a dedicated SPI EEPROM instead of embedding it in the bootloader
+EEPROM. Raspberry Pi 5 uses the RP1.
 
 The default update mechanism writes recovery.bin and the EEPROM update
-image(s) (pieeprom.upd and vl805.bin) to the boot partition.
+image(s) (pieeprom.upd and vl805.bin (if required)) to the boot partition.
 The SHA256 hash of the corresponding images are written to pieeprom.sig
 and/or vl805.sig. This guards against file system corruption which could
 cause the EEPROM to be flashed with an invalid image. This is not a
@@ -541,6 +562,7 @@ printVersions()
    echo "   RELEASE: ${FIRMWARE_RELEASE_STATUS} (${FIRMWARE_IMAGE_DIR})"
    echo "            Use ${RPI_EEPROM_UPDATE_CONFIG_TOOL} to change the release."
 
+   if [ "${BCM_CHIP}" = 2711 ]; then
       echo ""
       if [ "${HAVE_VL805_EEPROM}" = 1 ]; then
          echo "  VL805_FW: Dedicated VL805 EEPROM"
@@ -559,6 +581,7 @@ printVersions()
 
       echo "   CURRENT: ${VL805_CURRENT_VERSION}"
       echo "    LATEST: ${VL805_UPDATE_VERSION}"
+   fi
 }
 
 findBootFS()
@@ -585,9 +608,16 @@ findBootFS()
    # If BOOTFS is not a directory or doesn't contain any .elf files then
    # it's probably not the boot partition.
    [ -d "${BOOTFS}" ] || die "BOOTFS: \"${BOOTFS}\" is not a directory"
+
+   if [ "${BCM_CHIP}" = 2712 ]; then
+      if ! [ -e "${BOOTFS}/config.txt" ]; then
+         echo "WARNING: BOOTFS: \"${BOOTFS}/config.txt\" not found. Please check boot directory"
+      fi
+   else
       if [ "$(find "${BOOTFS}/" -name "*.elf" | wc -l)" = 0 ]; then
          echo "WARNING: BOOTFS: \"${BOOTFS}\" contains no .elf files. Please check boot directory"
       fi
+   fi
 }
 
 getVL805CurrentVersion()
@@ -596,12 +626,15 @@ getVL805CurrentVersion()
    # space which is only accessible as root. If the command is not run as
    # root then treat the version as unknown and skip VLI updates.
    VL805_CURRENT_VERSION=""
+
+   if [ "${BCM_CHIP}" = 2711 ]; then
       if [ "$(id -u)" = "0" ]; then
             vlver="$(lspci -d 1106:3483 -xxx | awk '/^50:/ { print "VL805 FW version: " $5 $4 $3 $2 }')"
          if [ -n "${vlver}" ]; then
             VL805_CURRENT_VERSION="${vlver#*: }"
          fi
       fi
+   fi
 }
 
 getVL805UpdateVersion()
@@ -824,6 +857,7 @@ while getopts A:abdhilf:m:ju:rs option; do
    j) JSON_OUTPUT="yes"
       ;;
    l)
+      checkDependencies
       getBootloaderUpdateVersion
       echo "${BOOTLOADER_UPDATE_IMAGE}"
       exit 0
@@ -834,6 +868,7 @@ while getopts A:abdhilf:m:ju:rs option; do
       ;;
    r) [ "$(id -u)" = "0" ] || die "* Must be run as root - try 'sudo rpi-eeprom-update -r'"
       echo "Removing temporary files from previous EEPROM update"
+      checkDependencies
       removePreviousUpdates
       exit 0
       ;;

rpi-eeprom-update-default

@@ -1,7 +1,6 @@
 
 FIRMWARE_ROOT=/lib/firmware/raspberrypi/bootloader
-FIRMWARE_RELEASE_STATUS="critical"
-FIRMWARE_IMAGE_DIR="${FIRMWARE_ROOT}/${FIRMWARE_RELEASE_STATUS}"
+FIRMWARE_RELEASE_STATUS="default"
 FIRMWARE_BACKUP_DIR="/var/lib/raspberrypi/bootloader/backup"
 USE_FLASHROM=0
 EEPROM_CONFIG_HOOK=

test/install

@@ -19,9 +19,16 @@ CONFIG="/etc/default/rpi-eeprom-update"
 
 [ "$(id -u)" = "0" ] || die "$0 Must be run as root - try 'sudo $0 [-b]'"
 
+# Clear out the old firmware
 rm -rf /lib/firmware/raspberrypi/bootloader
-mkdir -p /lib/firmware/raspberrypi/bootloader
-cp -rf "${FIRMWARE_DIR}"/* /lib/firmware/raspberrypi/bootloader
+rm -rf /lib/firmware/raspberrypi/bootloader-2711
+rm -rf /lib/firmware/raspberrypi/bootloader-2712
+
+mkdir -p /lib/firmware/raspberrypi/bootloader-2711
+rsync -alv "${FIRMWARE_DIR}-2711"/* /lib/firmware/raspberrypi/bootloader-2711 || echo "Failed"
+mkdir -p /lib/firmware/raspberrypi/bootloader-2712
+rsync -alv "${FIRMWARE_DIR}-2712"/* /lib/firmware/raspberrypi/bootloader-2712 || echo "Failed"
+
 cp -fv "${script_dir}/../rpi-eeprom-config" /usr/bin
 cp -fv "${script_dir}/../rpi-eeprom-digest" /usr/bin
 cp -fv "${script_dir}/../rpi-eeprom-update" /usr/bin

test/test-rpi-eeprom-config

@@ -167,11 +167,11 @@ check_conf_size_too_large()
 echo "Check config read and loopback read/write against reference config files"
 versions="$(cd configs; ls *.txt | sed 's/bootconf-//g' | sed 's/.txt//g')"
 for ver in ${versions}; do
-   if [ -f "../firmware/old/beta/pieeprom-${ver}.bin" ]; then
+   if [ -f "../firmware-2711/old/beta/pieeprom-${ver}.bin" ]; then
        # Use this directory if the bootloader has been archived
-       check_loopback "../firmware/old/beta/pieeprom-${ver}.bin" "configs/bootconf-${ver}.txt"
+       check_loopback "../firmware-2711/old/beta/pieeprom-${ver}.bin" "configs/bootconf-${ver}.txt"
    else
-       check_loopback "../firmware/beta/pieeprom-${ver}.bin" "configs/bootconf-${ver}.txt"
+       check_loopback "../firmware-2711/beta/pieeprom-${ver}.bin" "configs/bootconf-${ver}.txt"
    fi
    cleanup
 done
@@ -181,14 +181,14 @@ check_loopback pieeprom-signed.bin bootconf.txt
 check_signed_loopback pieeprom-signed.bin bootconf.txt bootconf.sig public.pem
 cleanup
 
-check_update "../firmware/old/beta/pieeprom-2019-07-15.bin" "pieeprom-2019-07-15-freeze.bin" "bootconf-2019-07-15-freeze.txt"
+check_update "../firmware-2711/old/beta/pieeprom-2019-07-15.bin" "pieeprom-2019-07-15-freeze.bin" "bootconf-2019-07-15-freeze.txt"
 cleanup
 
-check_reduce_size "../firmware/old/beta/pieeprom-2019-07-15.bin" "bootconf-2019-07-15.txt"
+check_reduce_size "../firmware-2711/old/beta/pieeprom-2019-07-15.bin" "bootconf-2019-07-15.txt"
 cleanup
 
-check_conf_size_large "../firmware/old/beta/pieeprom-2019-07-15.bin"
+check_conf_size_large "../firmware-2711/old/beta/pieeprom-2019-07-15.bin"
 cleanup
 
-check_conf_size_too_large "../firmware/old/beta/pieeprom-2019-07-15.bin"
+check_conf_size_too_large "../firmware-2711/old/beta/pieeprom-2019-07-15.bin"
 cleanup