Merge branch 'master' into debian/bookworm

firmware-2711/release-notes.md

@@ -1,5 +1,10 @@
 # Raspberry Pi4 bootloader EEPROM release notes
 
+## 2024-12-07: Enable banklow (and so NUMA) by default (latest)
+
+* Enable banklow (and so NUMA) by default
+  banklow=1 (2712) and banklow=3 (2711) give the best performance.
+
 ## 2024-10-21: Fix PCIe BAR issue for some switches  (latest)
 
 * Boot-menu improvements

firmware-2712/release-notes.md

@@ -1,5 +1,21 @@
 # Raspberry Pi5 bootloader EEPROM release notes
 
+## 2024-12-07: Enable banklow (and so NUMA) by default (latest)
+
+* Enable banklow (and so NUMA) by default
+  banklow=1 (2712) and banklow=3 (2711) give the best performance.
+* enable_uart=1 now enables a Linix UART console on the 40-pin header
+  unless a cable is detected on the dedicated boot-uart.
+* Recreate internal bl31 stub from clean git tree to fix dirty commit message.
+
+## 2024-11-27: rp1fw: Add FIFO_STATE & DRAIN_TX, fix CAN_ADD_PROGRAM (default)
+
+* rp1fw: Add FIFO_STATE & DRAIN_TX, fix CAN_ADD_PROGRAM
+  RP1 firmware eb39cfd516f8c90628aa9d91f52370aade5d0a55 adds methods
+  to drain the TX FIFO and retrieve the state of both FIFOs. It also
+  fixes the CAN_ADD_PROGRAM implementation, which was fatally broken.
+* network-install - Update the UI to display the board model / variant.
+
 ## 2024-11-12: Promote 2024-11-12 to default release (default)
 
 * Promote 2024-11 to the default release and archive older versions.

imager/2711-config/boot-conf-default.txt

@@ -1,6 +0,0 @@
-[all]
-BOOT_UART=0
-WAKE_ON_GPIO=1
-ENABLE_SELF_UPDATE=1
-BOOT_ORDER=0xf41
-

imager/2712-config/boot-conf-default.txt

@@ -1,4 +0,0 @@
-[all]
-BOOT_UART=1
-BOOT_ORDER=0xf461
-POWER_OFF_ON_HALT=0

imager/2712-config/boot-conf-network.txt

@@ -1,5 +1,4 @@
 [all]
 BOOT_UART=1
 BOOT_ORDER=0xf21
-POWER_OFF_ON_HALT=0
-
+NET_INSTALL_AT_POWER_ON=1

imager/2712-config/boot-conf-sd.txt

@@ -1,4 +1,4 @@
 [all]
 BOOT_UART=1
 BOOT_ORDER=0xf461
-POWER_OFF_ON_HALT=0
+NET_INSTALL_AT_POWER_ON=1

imager/2712-config/boot-conf-usb.txt

@@ -1,5 +1,4 @@
 [all]
 BOOT_UART=1
 BOOT_ORDER=0xf146
-POWER_OFF_ON_HALT=0
-
+NET_INSTALL_AT_POWER_ON=1

imager/make-imager-release

@@ -8,4 +8,4 @@ script_dir=$(cd "$(dirname "$0")" && pwd)
 ${script_dir}/make-release critical 2023-01-11 000138c0 "${script_dir}/2711-config" release-2711 rpi-boot-eeprom-recovery 2711
 
 # Pi5
-${script_dir}/make-release critical 2024-09-23 "" "${script_dir}/2712-config" release-2712 rpi-boot-eeprom-recovery 2712
+${script_dir}/make-release critical 2024-11-12 "" "${script_dir}/2712-config" release-2712 rpi-boot-eeprom-recovery 2712