imager-release: Update for Pi5

imager/README-2711.txt

@@ -1,4 +1,4 @@
-Raspberry Pi 4 EEPROM bootloader rescue image
+Raspberry Pi 4 EEPROM bootloader recovery image
 *********************************************
 
 The Raspberry Pi 4 contains a small EEPROM used to store the bootloader.

imager/README-2712.txt

@@ -0,0 +1,33 @@
+Raspberry Pi 5 EEPROM bootloader recovery image
+***********************************************
+
+The Raspberry Pi 5 contains a small EEPROM used to store the bootloader.
+
+This rescue image reverts the bootloader EEPROM to factory default settings.
+
+The easiest method for creating EEPROM rescue images, and formatting SD 
+cards, is to use Raspberry Pi Imager from https://raspberrypi.com/software.
+Raspberry Pi Imager provides a GUI for downloading the latest version of 
+this rescue image and flashing it to a spare SD card.
+
+Alternatively, copy the contents of this zip file to a blank
+FAT formatted SD card. The FAT partition must be < 32 GB.
+
+To update the EEPROM:
+
+1. Power off the Raspberry Pi
+2. Insert the bootloader update SD card
+3. Power on the Raspberry Pi
+4. Wait at least 10 seconds
+
+If successful, the green LED on the Raspberry Pi will blink rapidly forever.
+An unsuccessful update of the EEPROM is indicated by a different blinking 
+pattern corresponding to the specific error.
+
+If an HDMI display is attached, then the screen will display green for
+success or red if a failure occurs.
+
+Once the EEPROM is updated, the SD card can be removed. In order to make
+the entire capacity of the SD card available again, you must then reformat
+the SD card using Raspberry Pi Imager by selecting the 'format card as 
+FAT32' option.

imager/make-imager-release

@@ -8,4 +8,4 @@ script_dir=$(cd "$(dirname "$0")" && pwd)
 ${script_dir}/make-release critical 2023-01-11 000138c0 "${script_dir}/2711-config" release-2711 rpi-boot-eeprom-recovery 2711
 
 # Pi5
-${script_dir}/make-release critical 2023-09-21 "" "${script_dir}/2712-config" release-2712 rpi-boot-eeprom-recovery 2712
+${script_dir}/make-release critical 2023-10-18 "" "${script_dir}/2712-config" release-2712 rpi-boot-eeprom-recovery 2712

imager/make-recovery-images

@@ -19,18 +19,21 @@ trap cleanup EXIT
 [ -n "${SUDO_UID}" ] || die "SUDO_UID not defined"
 [ -n "${SUDO_GID}" ] || die "SUDO_GID not defined"
 
-for src in release/*.zip; do
+build_images()
-   src=$(basename "${src}")
+{
-   img=$(echo "${src}" | sed 's/\.zip/.img/')
+   chip="$1"
-   TMP_DIR=$(mktemp -d)
+   for src in release-${chip}/*.zip; do
-   (
+	   src=$(basename "${src}")
-      cp "release/${src}" "${TMP_DIR}"
+	   img=$(echo "${src}" | sed 's/\.zip/.img/')
-      mkdir "${TMP_DIR}/files"
+	   TMP_DIR=$(mktemp -d)
-      cd "${TMP_DIR}/files"
+	   (
-      unzip "../${src}"
+	   cp "release-${chip}/${src}" "${TMP_DIR}"
-      cd "${TMP_DIR}"
+	   mkdir "${TMP_DIR}/files"
-      dd if=/dev/zero bs=1M count=258 of=temp.img
+	   cd "${TMP_DIR}/files"
-      /sbin/sfdisk temp.img <<EOF
+	   unzip "../${src}"
+	   cd "${TMP_DIR}"
+	   dd if=/dev/zero bs=1M count=258 of=temp.img
+	   /sbin/sfdisk temp.img <<EOF
 label: dos
 label-id: 0x0a7b5ac5
 device: temp.img
@@ -38,29 +41,35 @@ unit: sectors
 
 ./test.img1 : start=        2048, size=       524288, type=c
 EOF
-      file temp.img
+   file temp.img
-      kpartx -lv temp.img | head -n1 | awk '{print $1}'
+   kpartx -lv temp.img | head -n1 | awk '{print $1}'
-      LOOP="/dev/mapper/$(kpartx -lv temp.img | head -n1 | awk '{print $1}')"
+   LOOP="/dev/mapper/$(kpartx -lv temp.img | head -n1 | awk '{print $1}')"
-      kpartx -av temp.img
+   kpartx -av temp.img
-      /sbin/mkfs.fat -F 32 -s 1 "${LOOP}"
+   /sbin/mkfs.fat -F 32 -s 1 "${LOOP}"
-      mkdir fs
+   mkdir fs
-      mount "${LOOP}" fs
+   mount "${LOOP}" fs
-      cp -v files/* fs
+   cp -v files/* fs
-      sync
+   sync
-      sleep 5
+   sleep 5
-      umount fs
+   umount fs
-      # Delay before calling kpartx otherwise it's sometimes possible to get orphaned loopback devices
+   # Delay before calling kpartx otherwise it's sometimes possible to get orphaned loopback devices
-      sleep 5
+   sleep 5
-      kpartx -dv temp.img
+   kpartx -dv temp.img
-   )
+)
-   mkdir -p images
+   image_dir="images-${chip}"
-   chown "${SUDO_UID}:${SUDO_GID}" images
+   mkdir -p "${image_dir}"
-   mv "${TMP_DIR}/temp.img" "images/${img}"
+   chown "${SUDO_UID}:${SUDO_GID}" "${image_dir}"
-   file "images/${img}"
+   mv "${TMP_DIR}/temp.img" "${image_dir}/${img}"
-   cd images
+   file "${image_dir}/${img}"
+   cd "${image_dir}"
    zip "${src}" "${img}"
    cd ..
-   rm "images/${img}"
+   rm "${image_dir}/${img}"
-   chown "${SUDO_UID}:${SUDO_GID}" "images/${src}"
+   chown "${SUDO_UID}:${SUDO_GID}" "${image_dir}/${src}"
-done
+   done
-echo "Wrote images for rpi-imager to $(pwd)/images/${src}"
+   echo "Wrote images for rpi-imager to $(pwd)/${image_dir}/${src}"
+}
+
+build_images 2711
+build_images 2712
+

imager/make-release

@@ -30,7 +30,7 @@ gen_release() {
    (
       tmp_dir="$(mktemp -d --tmpdir tmp.rpi-eeprom.XXXXXXXXXX)"
       cd "${tmp_dir}"
-      cp "${script_dir}/README.txt" .
+      cp "${script_dir}/README-${bcm_chip}.txt" README.txt
       cp "${firmware_dir}/recovery.bin" .
       if [ ${bcm_chip} = 2711 ]; then
          cp "${firmware_dir}/vl805-${vl805_version}.bin" vl805.bin
@@ -79,9 +79,9 @@ firmware_dir=${script_dir}/../firmware-${bcm_chip}/${firmware_status}
 if [ "${bcm_chip}" = 2711 ]; then
    [ -f "${firmware_dir}/vl805-${vl805_version}.bin" ] || (echo "${firmware_status}/vl805-${vl805_version}.bin doesn't exist" && exit 1)
    [ -d "${config_dir}" ] || (echo "${config_dir} doesn't exist" && exit 1)
-   tag="${pieeprom_version}-vl805-${vl805_version}"
+   tag="${pieeprom_version}-${bcm_chip}-vl805-${vl805_version}"
 else
-   tag="${pieeprom_version}"
+   tag="${pieeprom_version}-${bcm_chip}"
 fi
 # use realpath to ensure paths are absolute
 config_dir=$(realpath "${config_dir}")