diff --git a/firmware-2711/latest/pieeprom-2024-12-07.bin b/firmware-2711/latest/pieeprom-2024-12-07.bin
new file mode 100644
index 0000000..95466a9
Binary files /dev/null and b/firmware-2711/latest/pieeprom-2024-12-07.bin differ
diff --git a/firmware-2711/latest/recovery.bin b/firmware-2711/latest/recovery.bin
index 61a1378..9071765 100644
Binary files a/firmware-2711/latest/recovery.bin and b/firmware-2711/latest/recovery.bin differ
diff --git a/firmware-2711/release-notes.md b/firmware-2711/release-notes.md
index 0d0a82e..4e46673 100644
--- a/firmware-2711/release-notes.md
+++ b/firmware-2711/release-notes.md
@@ -1,5 +1,10 @@
 # Raspberry Pi4 bootloader EEPROM release notes
 
+## 2024-12-07: Enable banklow (and so NUMA) by default (latest)
+
+* Enable banklow (and so NUMA) by default
+  banklow=1 (2712) and banklow=3 (2711) give the best performance.
+
 ## 2024-10-21: Fix PCIe BAR issue for some switches  (latest)
 
 * Boot-menu improvements
diff --git a/firmware-2712/default/recovery.bin b/firmware-2712/default/recovery.bin
index cbd1cfb..9fe3746 100644
Binary files a/firmware-2712/default/recovery.bin and b/firmware-2712/default/recovery.bin differ
diff --git a/firmware-2712/latest/pieeprom-2024-12-07.bin b/firmware-2712/latest/pieeprom-2024-12-07.bin
new file mode 100644
index 0000000..8156698
Binary files /dev/null and b/firmware-2712/latest/pieeprom-2024-12-07.bin differ
diff --git a/firmware-2712/latest/recovery.bin b/firmware-2712/latest/recovery.bin
index cbd1cfb..9fe3746 100644
Binary files a/firmware-2712/latest/recovery.bin and b/firmware-2712/latest/recovery.bin differ
diff --git a/firmware-2712/release-notes.md b/firmware-2712/release-notes.md
index 02740a6..4fb75ff 100644
--- a/firmware-2712/release-notes.md
+++ b/firmware-2712/release-notes.md
@@ -1,5 +1,13 @@
 # Raspberry Pi5 bootloader EEPROM release notes
 
+## 2024-12-07: Enable banklow (and so NUMA) by default (latest)
+
+* Enable banklow (and so NUMA) by default
+  banklow=1 (2712) and banklow=3 (2711) give the best performance.
+* enable_uart=1 now enables a Linix UART console on the 40-pin header
+  unless a cable is detected on the dedicated boot-uart.
+* Recreate internal bl31 stub from clean git tree to fix dirty commit message.
+
 ## 2024-11-27: rp1fw: Add FIFO_STATE & DRAIN_TX, fix CAN_ADD_PROGRAM (default)
 
 * rp1fw: Add FIFO_STATE & DRAIN_TX, fix CAN_ADD_PROGRAM