* Avoid default PCIe / XHCI probe on CM4 unless required for the
current boot mode (USB_MSD or NVME).
* Leave PCIe RC in reset state when loading start.elf except for
USB-MSD mode.
* Minor update to BRCM SDRAM settings.
* Add USB_MSD_STARTUP_DELAY option (default 0 option).
This adds a configurable delay (in milliseconds) the first time
the USB host controller is initialised before device enumeration.
Normally, this should not be required. However, some HDD enclosures may
require an extended startup delay in order to spinup drives. Without this
the get-capacity command may stall and timeout.
* Use the latest BRCM SDRAM settings.
* FAT12 support for small bootloader ramdisk images.
* Minor file-system performance optimisations.
* Added recovery.bin config.txt option (erase_eeprom=1) to perform
an SPI chip-erase operation instead of programming the bootloader image.
Interesting changes since the last default release:-
* Display VC_BUILD_ID strings instead of the SHA256 hash
* Add support for [cm4] and [pi400] config conditionals filters.
* Change network boot to use the same "RXID" Ethernet PHY configuration as the 5.10 kernel
* TFTP - reply to duplicate ACKS
* Skip rendering of HDMI diagnostics display for the first 8 seconds unless an error occurs.
* UDP checksum fixes
* Add support for the BCM2711 XHCI controller - BOOT_ORDER 0x5
* XHCI protocol layer fixes for non-VLI controllers
* Avoid USB MSD timeout of there is only one device
* Implement tryboot for OS upgrade fallback
* Check the update-timestamp before applying an update in SELF-UPDATE mode
* Update recovery.bin to 2021-04-13 release for error pattern fix
on SDRAM failure.
Move to to the old directory now that it's no longer referenced by rpi-eeprom-update.
Add a dependency check for 'lspci' which is normally provided by
pciutils or busybox and remove the failover to the vl805 helper.
Tweak the failure messages for missing dependencies to be slightly less
OS specific.
Move these out of the directories selected by APT now that 2020-09-03
is the default release.
Preserve the releases which were promoted to stable in-case these are
referenced via scripts.
