imager-release: Update for Pi5

Fix typo

README.md

@@ -1,5 +1,5 @@
 # rpi-eeprom
-This repository contains the scripts and pre-compiled binaries used to create the `rpi-eeprom` package which is used to update the Raspberry Pi 4 bootloader and VLI USB controller EEPROMs.
+This repository contains the scripts and pre-compiled binaries used to create the `rpi-eeprom` package which is used to update the Raspberry Pi 4 and Raspberry Pi 5 bootloaders EEPROM images.
 
 # Support
 Please check the Raspberry Pi [general discussion forum](https://forums.raspberrypi.com/viewforum.php?f=63) if you have a support question.
@@ -12,5 +12,4 @@ To reset the bootloader back to factory defaults use [Raspberry Pi Imager](https
 * [Bootloader EEPROM](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-4-boot-eeprom)
 * [Bootloader configuration](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-4-bootloader-configuration)
 * [Updating the Compute Module 4 bootloader](https://www.raspberrypi.com/documentation/computers/compute-module.html#cm4bootloader)
-* [Release notes](firmware/release-notes.md)
+* [Releases and release notes](releases.md)
-* [Releases](releases.md)

debian/.gitignore

@@ -1,9 +0,0 @@
-.debhelper/
-debhelper-build-stamp
-files
-rpi-eeprom/
-rpi-eeprom-images/
-*.debhelper.log
-*.debhelper
-*.substvars
-*.1

debian/LICENCE.bootloader

@@ -1,28 +0,0 @@
-Copyright (c) 2019, Raspberry Pi (Trading) Ltd.
-All rights reserved.
-
-Redistribution.  Redistribution and use in binary form, without
-modification, are permitted provided that the following conditions are
-met:
-
-* This software may only be used for the purposes of developing for,
-  running or using a Raspberry Pi device.
-* Redistributions must reproduce the above copyright notice and the
-  following disclaimer in the documentation and/or other materials
-  provided with the distribution.
-* Neither the name of the copyright holder nor the names of its
-  contributors may be used to endorse or promote products derived
-  from this software without specific prior written permission.
-
-DISCLAIMER.  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
-BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
-FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGE. 

debian/compat

@@ -1 +0,0 @@
-11

debian/control

@@ -1,29 +0,0 @@
-Source: rpi-eeprom
-Section: misc
-Priority: optional
-Maintainer: Serge Schneider <serge@raspberrypi.org>
-Build-Depends: debhelper (>= 11), help2man, python3-minimal
-Standards-Version: 4.1.3
-Homepage: https://github.com/raspberrypi/rpi-eeprom/
-Vcs-Browser: https://github.com/raspberrypi/rpi-eeprom/
-Vcs-Git: https://github.com/raspberrypi/rpi-eeprom.git
-
-Package: rpi-eeprom
-Architecture: armhf arm64
-Depends: ${shlibs:Depends}, ${misc:Depends}, libraspberrypi-bin, python3,
- binutils, raspberrypi-bootloader (>= 1.20190819), pciutils
-Breaks: rpi-eeprom-images (<<7.2)
-Replaces: rpi-eeprom-images (<<7.2)
-Recommends: flashrom
-Provides: rpi-eeprom-images
-Description: Raspberry Pi 4 boot EEPROM updater
- Checks whether the Raspberry Pi bootloader EEPROM is up-to-date and updates
- the EEPROM.
-
-Package: rpi-eeprom-images
-Architecture: armhf arm64
-Depends: ${misc:Depends}, rpi-eeprom (>=7.2)
-Priority: optional
-Section: oldlibs
-Description: transitional package
- This is a transitional package. It can safely be removed.

debian/copyright

@@ -1 +0,0 @@
-../LICENSE

debian/default/rpi-eeprom-update

@@ -1 +0,0 @@
-FIRMWARE_RELEASE_STATUS="default"

debian/gbp.conf

@@ -1,3 +0,0 @@
-[DEFAULT]
-upstream-tree = master
-debian-branch = debian/buster

debian/rpi-eeprom.docs

@@ -1,2 +0,0 @@
-debian/LICENCE.bootloader
-firmware/release-notes.md

debian/rpi-eeprom.install

@@ -1,12 +0,0 @@
-rpi-eeprom-config usr/bin/
-rpi-eeprom-update usr/bin/
-rpi-eeprom-digest usr/bin/
-debian/default/ etc/
-
-firmware/default lib/firmware/raspberrypi/bootloader/
-firmware/latest lib/firmware/raspberrypi/bootloader/
-
-firmware/critical lib/firmware/raspberrypi/bootloader/
-firmware/stable lib/firmware/raspberrypi/bootloader/
-firmware/beta lib/firmware/raspberrypi/bootloader/
-firmware/release-notes.md lib/firmware/raspberrypi/bootloader/

debian/rpi-eeprom.manpages

@@ -1,2 +0,0 @@
-debian/rpi-eeprom-update.1
-debian/rpi-eeprom-config.1

debian/rpi-eeprom.postinst

@@ -1,39 +0,0 @@
-#!/bin/sh
-# postinst script for rpi-eeprom
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postinst> `configure' <most-recently-configured-version>
-#        * <old-postinst> `abort-upgrade' <new version>
-#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
-#          <new-version>
-#        * <postinst> `abort-remove'
-#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
-#          <failed-install-package> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see https://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    configure)
-    ;;
-
-    abort-upgrade|abort-remove|abort-deconfigure)
-    ;;
-
-    *)
-        echo "postinst called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0

debian/rpi-eeprom.postrm

@@ -1,40 +0,0 @@
-#!/bin/sh
-# postrm script for rpi-eeprom
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <postrm> `remove'
-#        * <postrm> `purge'
-#        * <old-postrm> `upgrade' <new-version>
-#        * <new-postrm> `failed-upgrade' <old-version>
-#        * <new-postrm> `abort-install'
-#        * <new-postrm> `abort-install' <old-version>
-#        * <new-postrm> `abort-upgrade' <old-version>
-#        * <disappearer's-postrm> `disappear' <overwriter>
-#          <overwriter-version>
-# for details, see https://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    purge)
-        rm -rf /var/lib/raspberrypi/bootloader/backup/
-    ;;
-    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
-    ;;
-
-    *)
-        echo "postrm called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0

debian/rpi-eeprom.prerm

@@ -1,38 +0,0 @@
-#!/bin/sh
-# prerm script for rpi-eeprom
-#
-# see: dh_installdeb(1)
-
-set -e
-
-# summary of how this script can be called:
-#        * <prerm> `remove'
-#        * <old-prerm> `upgrade' <new-version>
-#        * <new-prerm> `failed-upgrade' <old-version>
-#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
-#        * <deconfigured's-prerm> `deconfigure' `in-favour'
-#          <package-being-installed> <version> `removing'
-#          <conflicting-package> <version>
-# for details, see https://www.debian.org/doc/debian-policy/ or
-# the debian-policy package
-
-
-case "$1" in
-    remove|upgrade|deconfigure)
-    ;;
-
-    failed-upgrade)
-    ;;
-
-    *)
-        echo "prerm called with unknown argument \`$1'" >&2
-        exit 1
-    ;;
-esac
-
-# dh_installdeb will replace this with shell code automatically
-# generated by other debhelper scripts.
-
-#DEBHELPER#
-
-exit 0

debian/rpi-eeprom.rpi-eeprom-update.service

@@ -1,11 +0,0 @@
-[Unit]
-Description=Check for Raspberry Pi EEPROM updates
-After=boot.mount
-
-[Service]
-Type=oneshot
-RemainAfterExit=true
-ExecStart=/usr/bin/rpi-eeprom-update -s -a
-
-[Install]
-WantedBy=multi-user.target

debian/rules

@@ -1,27 +0,0 @@
-#!/usr/bin/make -f
-#export DH_VERBOSE = 1
-
-include /usr/share/dpkg/pkg-info.mk
-
-%:
-	dh $@
-
-override_dh_installsystemd:
-	dh_installsystemd --name=rpi-eeprom-update
-
-override_dh_auto_build: debian/rpi-eeprom-update.1 debian/rpi-eeprom-config.1
-
-override_dh_install:
-	mkdir -p debian/rpi-eeprom/var/lib/raspberrypi/bootloader/backup/
-	dh_install
-
-debian/rpi-eeprom-update.1:
-	help2man -N --version-string="${DEB_VERSION_UPSTREAM}" --help-option="-h" \
-		--name="Checks whether the Raspberry Pi bootloader EEPROM is \
-up-to-date and updates the EEPROM" \
-		--output=$@ ./rpi-eeprom-update
-
-debian/rpi-eeprom-config.1:
-	help2man -N --version-string="${DEB_VERSION_UPSTREAM}" --help-option="-h" \
-		--name="Bootloader EEPROM configuration tool for the Raspberry Pi 4B" \
-		--output=$@ ./rpi-eeprom-config

debian/source/format

@@ -1 +0,0 @@
-3.0 (quilt)

debian/source/lintian-overrides

@@ -1 +0,0 @@
-debian-copyright-is-symlink

firmware-2711/beta

@@ -0,0 +1 @@
+latest/

firmware-2711/critical

@@ -0,0 +1 @@
+default/