mirror of
https://github.com/raspberrypi/rpi-eeprom.git
synced 2026-01-21 05:25:03 +08:00
34 lines
1.3 KiB
Plaintext
34 lines
1.3 KiB
Plaintext
Raspberry Pi 5 EEPROM bootloader recovery image
|
|
***********************************************
|
|
|
|
The Raspberry Pi 5 contains a small EEPROM used to store the bootloader.
|
|
|
|
This rescue image reverts the bootloader EEPROM to factory default settings.
|
|
|
|
The easiest method for creating EEPROM rescue images, and formatting SD
|
|
cards, is to use Raspberry Pi Imager from https://raspberrypi.com/software.
|
|
Raspberry Pi Imager provides a GUI for downloading the latest version of
|
|
this rescue image and flashing it to a spare SD card.
|
|
|
|
Alternatively, copy the contents of this zip file to a blank
|
|
FAT formatted SD card. The FAT partition must be < 32 GB.
|
|
|
|
To update the EEPROM:
|
|
|
|
1. Power off the Raspberry Pi
|
|
2. Insert the bootloader update SD card
|
|
3. Power on the Raspberry Pi
|
|
4. Wait at least 10 seconds
|
|
|
|
If successful, the green LED on the Raspberry Pi will blink rapidly forever.
|
|
An unsuccessful update of the EEPROM is indicated by a different blinking
|
|
pattern corresponding to the specific error.
|
|
|
|
If an HDMI display is attached, then the screen will display green for
|
|
success or red if a failure occurs.
|
|
|
|
Once the EEPROM is updated, the SD card can be removed. In order to make
|
|
the entire capacity of the SD card available again, you must then reformat
|
|
the SD card using Raspberry Pi Imager by selecting the 'format card as
|
|
FAT32' option.
|