mirror of
https://github.com/raspberrypi/rpi-eeprom.git
synced 2026-01-20 21:13:36 +08:00
35 lines
1.3 KiB
Plaintext
35 lines
1.3 KiB
Plaintext
Raspberry Pi 4 EEPROM bootloader rescue image
|
|
*********************************************
|
|
|
|
The Raspberry Pi 4 contains a small EEPROM used to store the bootloader.
|
|
|
|
This rescue image reverts the bootloader EEPROM to factory default settings.
|
|
|
|
This rescue image also updates the USB 3 controller (VL805) firmware to the
|
|
latest version, 138a1, which has better full-speed isochronous endpoint
|
|
support.
|
|
|
|
The easiest method for creating EEPROM rescue images, and formatting SD
|
|
cards, is to use Raspberry Pi Imager from https://raspberrypi.com/software.
|
|
Raspberry Pi Imager provides a GUI for downloading the latest version of
|
|
this rescue image and flashing it to an SD card.
|
|
|
|
Alternatively, copy the contents of this zip file to a blank
|
|
FAT formatted SD card. The FAT partition must be < 32 GB.
|
|
|
|
To update the EEPROM:
|
|
|
|
1. Power off the Raspberry Pi
|
|
2. Insert an SD card containing the files from this zip file
|
|
3. Power on the Raspberry Pi
|
|
4. Wait at least 10 seconds
|
|
|
|
If successful, the green LED on the Raspberry Pi will blink rapidly forever.
|
|
An unsuccessful update of the EEPROM is indicated by a different blinking
|
|
pattern corresponding to the specific error.
|
|
|
|
If an HDMI display is attached, then the screen will display green for
|
|
success or red if a failure occurs.
|
|
|
|
Once the EEPROM is updated, the SD card can be removed.
|