Tim Gover fe7bfc7201 pieeprom-2024-12-07: 2711: 2712: Enable NUMA by default (latest) ...

* Enable banklow (and so NUMA) by default
  banklow=1 (2712) and banklow=3 (2711) give the best performance.
* enable_uart=1 now enables a Linix UART console on the 40-pin header
  unless a cable is detected on the dedicated boot-uart.
* Recreate internal bl31 stub from clean git tree to fix dirty commit
  message.

2024-12-07 18:14:54 +00:00

..

pieeprom-2023-01-11.bin

firmware-2711: Switch symlinks to use the standard release names

2023-09-29 11:19:24 +01:00

pieeprom-2023-05-11.bin

firmware-2711: Switch symlinks to use the standard release names

2023-09-29 11:19:24 +01:00

pieeprom-2024-01-18.bin

2024-01-18: 2711: Fix issue with minimal sized FAT partition - STABLE

2024-01-18 20:08:20 +00:00

pieeprom-2024-01-22.bin

pieeprom-2024-01-22: 2711: Fix issue boot.img end sector check - STABLE

2024-01-22 10:51:22 +00:00

pieeprom-2024-04-15.bin

pieeprom-2024-04-15: 2711: Fix tryboot mode in secure-boot - STABLE

2024-04-15 16:52:48 +01:00

pieeprom-2024-04-17.bin

pieeprom-2024-04-17: 2712: 2711: Build Pi4 and Pi5 firmware from the same branch

2024-04-17 14:20:36 +01:00

pieeprom-2024-05-17.bin

pieeprom-2024-05-17: 2711: Ignore bootloader updates for Pi5 on Pi4 - (latest)

2024-05-17 13:55:38 +01:00

pieeprom-2024-07-30.bin

pieeprom-2024-07-30: 2711: USB boot fixes for CM4-S and interop improvments (latest)

2024-07-30 15:54:30 +01:00

pieeprom-2024-09-05.bin

pieeprom-2024-09-05: 2712: 2711: Fix self-update if EEPROM is write-protected (latest)

2024-09-05 22:07:04 +01:00

pieeprom-2024-10-10.bin

2024-10-10: 2711: Use soft-reset to preseve SDRAM contents after ramoops (latest)

2024-10-10 11:15:07 +01:00

pieeprom-2024-10-21.bin

pieeprom- 2024-10-21: 2712: 2711: Fix PCIe BAR issue for some switches (latest)

2024-10-21 18:45:38 +01:00

pieeprom-2024-12-07.bin

pieeprom-2024-12-07: 2711: 2712: Enable NUMA by default (latest)

2024-12-07 18:14:54 +00:00

recovery.bin

pieeprom-2024-12-07: 2711: 2712: Enable NUMA by default (latest)

2024-12-07 18:14:54 +00:00

vl805-000138c0.bin

firmware-2711: Switch symlinks to use the standard release names

2023-09-29 11:19:24 +01:00