rpi-update/rpi-update

#!/bin/bash

set -o nounset
set -o errexit

REPO_URI="http://github.com/Hexxeh/rpi-firmware"

UPDATE2=${UPDATE2:-1}
UPDATE_URI="https://github.com/Hexxeh/rpi-update/raw/master/rpi-update"

if [[ ${BOOT_PATH:-"unset"} == "unset" && ${ROOT_PATH:-"unset"} != "unset" ]] ||
[[ ${BOOT_PATH:-"unset"} != "unset" && ${ROOT_PATH:-"unset"} == "unset" ]]; then
	echo "You need to specify both ROOT_PATH and BOOT_PATH, or neither"
	exit 1
fi

ROOT_PATH=${ROOT_PATH:-"/"}
BOOT_PATH=${BOOT_PATH:-"/boot"}
SKIP_KERNEL=${SKIP_KERNEL:-0}
RPI_UPDATE_UNSUPPORTED=${RPI_UPDATE_UNSUPPORTED:-0}
FW_REPO="${REPO_URI}.git"
FW_REPOLOCAL="${ROOT_PATH}/root/.rpi-firmware"
FW_PATH="${BOOT_PATH}"
FW_MODPATH="${ROOT_PATH}/lib/modules"
FW_REV=${1:-""}
GITCMD="git --git-dir=\"${FW_REPOLOCAL}/.git\" --work-tree=\"${FW_REPOLOCAL}\""
[ "${RPI_UPDATE_UNSUPPORTED}" -ne 0 ] && echo -e "You appear to be trying to update firmware on an incompatible distribution. To force update, run the following:\nsudo -E RPI_UPDATE_UNSUPPORTED=0 ./rpi-update" && exit 1

function update_self() {
	echo "Performing self-update"
	_tempFileName="$0.tmp"

	if ! wget --quiet --output-document="${_tempFileName}" "${UPDATE_URI}"; then
		echo "Failed to download update for rpi-update!"
		echo "Make sure you have ca-certificates installed and that the time is set correctly"
		exit 1
	fi

	OCTAL_MODE=$(stat -c '%a' "$0")
	if ! chmod ${OCTAL_MODE} "${_tempFileName}" ; then
  		echo "Failed: Error while trying to set mode on ${_tempFileName}"
		exit 1
	fi

	cat > /tmp/updateScript.sh << EOF
	#!/bin/bash
	if mv "${_tempFileName}" "$0"; then
		rm -- "\$0"
		exec env UPDATE2=0 /bin/bash "$0" "${FW_REV}"
	else
		echo "Failed!"
	fi
EOF

	exec /bin/bash /tmp/updateScript.sh
}

function update_modules {
	if [[ ${SKIP_KERNEL} -eq 0 ]]; then
		cp -R "${FW_REPOLOCAL}/modules/"* "${FW_MODPATH}/"
		find "${FW_REPOLOCAL}/modules" -mindepth 1 -maxdepth 1 -type d | while read DIR; do
			depmod -b "${ROOT_PATH}" -a $(basename "${DIR}")
		done
	fi
}

function update_sdk {
	if [[ -f /etc/init.d/vcfiled ]]; then
		/etc/init.d/vcfiled stop
	fi

	ELFOUTPUT=$(readelf -a "${ROOT_PATH}/bin/bash")
	if [ "${ELFOUTPUT}" != "${ELFOUTPUT/VFP_args/}" ]; then
		echo "Using HardFP libraries"
		cp -R "${FW_REPOLOCAL}/vc/hardfp/"* "${ROOT_PATH}/"
	else
		echo "Using SoftFP libraries"
		cp -R "${FW_REPOLOCAL}/vc/softfp/"* "${ROOT_PATH}/"
	fi
	cp -R "${FW_REPOLOCAL}/vc/sdk/"* "${ROOT_PATH}/"

	if [[ -f /etc/init.d/vcfiled ]]; then
		/etc/init.d/vcfiled start
	fi
}

function update_firmware {
	rm -rf ${FW_PATH}/*.elf
	rm -rf ${FW_PATH}/*.bin
	cp ${FW_REPOLOCAL}/*.elf "${FW_PATH}/"
	cp ${FW_REPOLOCAL}/*.bin "${FW_PATH}/"
	cp ${FW_REPOLOCAL}/*.dat "${FW_PATH}/"
	if [[ ${SKIP_KERNEL} -eq 0 ]]; then
		cp "${FW_REPOLOCAL}/"*.img "${FW_PATH}/"
	else
		echo "Skipping kernel/modules updated as requested"
	fi
}

function finalise {
	if [[ -f "${FW_PATH}/arm192_start.elf" ]]; then
		cp "${FW_PATH}/arm192_start.elf" "${FW_PATH}/start.elf"
	fi
	ldconfig -r "${ROOT_PATH}"
	if [[ ${FW_REV} == "" ]]; then
		eval ${GITCMD} rev-parse master > "${FW_PATH}/.firmware_revision"
	fi
	sync
}

function download_repo {
	echo "Setting up firmware (this will take a few minutes)"
	mkdir -p "${FW_REPOLOCAL}"
	git clone "${FW_REPO}" "${FW_REPOLOCAL}" --depth=1 --quiet
	RETVAL=$?
	if [[ ${RETVAL} -ne 0 ]]; then
		echo "Failed to download new firmware files"
		exit 1
	fi
}

function update_repo {
	echo "Updating firmware (this will take a few minutes)"
	eval ${GITCMD} fetch --quiet
	RETVAL=$?
	if [[ ${RETVAL} -ne 0 ]]; then
		echo "Failed to download updated firmware files"
		exit 1
	fi
	eval ${GITCMD} reset --hard --quiet
	eval ${GITCMD} clean -f -d --quiet
	eval ${GITCMD} merge origin/master -m "automerge" --quiet
	RETVAL=$?
	if [[ ${RETVAL} -ne 0 ]]; then
		echo "Failed to download updated firmware files"
		exit 1
	fi
}

function do_backup {
	cp -a "${FW_PATH}" "${FW_PATH}.bak"
	cp -a "${FW_MODPATH}" "${FW_MODPATH}.bak"
}

function do_update {
	update_firmware
	update_modules
	update_sdk
	finalise
	echo "If no errors appeared, your firmware was successfully $1"
	if [[ "${ROOT_PATH}" == "/" ]]; then
		echo "A reboot is needed to activate the new firmware"
	fi
}

function download_rev {
	echo "Downloading specific firmware revision (this will take a few minutes)"
	mkdir -p "${FW_REPOLOCAL}"
	wget -q "${REPO_URI}/tarball/${FW_REV}" -O "${FW_REPOLOCAL}/${FW_REV}.tar.gz"
	tar xzf "${FW_REPOLOCAL}/${FW_REV}.tar.gz" -C "${FW_REPOLOCAL}" --strip-components=1
	rm "${FW_REPOLOCAL}/${FW_REV}.tar.gz"
}

if [[ ${EUID} -ne 0 ]]; then
	echo "This tool must be run as root"
	exit 1
fi

if [[ ${UPDATE2} -ne 0 ]]; then
	echo "Raspberry Pi firmware updater by Hexxeh, enhanced by AndrewS"
	update_self
fi

if [[ ! -d "${FW_PATH}" ]]; then
	echo "${FW_PATH} doesn't exist"
	exit 1
fi
if [[ ! -f "${FW_PATH}/start.elf" ]]; then
	echo "${FW_PATH}/start.elf doesn't exist."
	exit 1
fi
if [[ ! -d "${FW_MODPATH}" ]]; then
	echo "${FW_MODPATH} doesn't exist"
	exit 1
fi

command -v git >/dev/null 2>&1 || {
	echo "This tool requires you have Git installed, please install it first"
	echo "In Debian, try: sudo apt-get install git-core"
	echo "In Arch, try: pacman -S git"
	exit 1
}

command -v readelf >/dev/null 2>&1 || {
	echo "This tool requires you have readelf installed, please install it first"
	echo "In Debian, try: sudo apt-get install binutils"
	echo "In Arch, try: pacman -S binutils"
	exit 1
}

echo "ARM/GPU split is now defined in /boot/config.txt using the gpu_mem option!"
if [[ ${FW_REV} != "" ]]; then
	download_rev
	do_update "updated to revision ${FW_REV}"
elif [[ -f "${FW_REPOLOCAL}/.git/config" ]]; then
	update_repo
	if [[ -f "${FW_PATH}/.firmware_revision" ]] && [[ $(cat "${FW_PATH}/.firmware_revision") == $(eval ${GITCMD} rev-parse master) ]]; then
		echo "Your firmware is already up to date"
		finalise
	else
		do_update "updated"
	fi
else
	echo "We're running for the first time"
	download_repo
	do_backup
	do_update "setup"
fi