Add NVMe into the SD/USB/DEFAULT boot modes with a higher
priority than USB. The detection of NVMe HATs is quick so
there is no disadvantage in trying NVMe first.
* Initialise the DWC PHY to enable DWC host+peripheral support under Linux.
Requires 82069a7a02
* Force PWM on 3V3 supply if cameras or HATs are connected or if
power_force_3v3_pwm=1 in config.txt
Resolves an image quality issue with the GS camera.
* Add support for C(arm_min_freq) < 1500 MHz (must be at >= 200 MHz)
* Manufacturing test updates for DVFS.
Enforcing package checksum validation makes it difficult to install
new EEPROM binaries via rpi-update causing extra churn of APT releases.
Drop this check by default because random corruption of these files
either via software or users never actually happens.
* Add autodetect support for PCIe expansion HATs
* Add PCIE_PROBE=1 to the EEPROM config for custom PCIe exapansion
designs that do not support the upcoming HAT spec. This gives
similar behaviour to CM4 where PCIe x1 is enumerated to discover NVMe
devices.
* Fix loading of multiple initramfs images that are not 32-bit aligned sizes
https://github.com/raspberrypi/firmware/issues/1843
* Kernel load performance improvement - remove a memcpy
On Raspberry Pi 5 there are dedicated pins for the bootloader SPI
EEPROM. This makes it possible to do immediate updates via flashrom.
The "current" EEPROM config is the EEPROM config at boot rather
than what has just been written to the SPI flash because this is
consistent with current behaviour.
To use flashrom instead of recovery.bin for bootloader updates
set RPI_EEPROM_USE_FLASHROM=1 in /etc/defaults/rpi-eeprom-update
BCM2711
On CM4, Pi4, CM4-S, Pi400 config.txt must be modified to disable
the analog audio driver which shares the GPIO pins used by the
bootloader EEPROM.
dtparam=spi=on
dtoverlay=audremap
dtoverlay=spi-gpio40-45
* Fix SDIO / WiFi clock-setup for BOOT_ORDER=0xf14
* Fix SD power-on-reset
* Firmware support for improved watchdog driver
* Update DHCP Option97 to be R,P,i,5 on Pi5
The Pi5 EEPROM is larger and can take longer to update which
slightly increases the change of failure if the board power is
disconnected across an update. Re-enable recovery.bin for SD
updates for now.
* Add support for HAT gpiomap for improved HAT compatibility.
* Add I2C probe for DSI display auto detect
* Automatically set dtparam=nvme if booted from nvme
* Fix network boot reset issue where only the first attempt works.
* Adding pciex4_reset=0 to config.txt will leave RP1 PCIe enabled when
ARM stage is started.
* Prevent HDMI diagnostics being displayed immediately when waking
after HALT.
* Update board-name - "Rasberry Pi 5"
The EEPROM release names were changed to follow the naming
in raspi-config some time ago. Since the firmware directory
is being renamed to be chip specific for Pi5 support it's
good time to swap the symlink / release names.
BCM2711 and BCM2712 require different EEPROM firmware and
consequently the binaries have been moved to chip specific
firmware directories.
firmware-2711 / firmware-2712
Update the test/install script to remove previous firmware files.
This fixes a problem where the install script failed because
beta is now a symlink and not a directory.
Remove the beta release folder and replace with a symlink to the
'latest' release.
Including beta firmware in the APT release causes unecessary churn
and occasionally causes an issue where a user might end up on an
old and unsupported beta release.
Instead, beta releases are will be feature specific and installed
manually via 'rpi-eeprom-config --edit beta-firmware.bin'
i.e. beta releases will be out-of-package custom firmware releases
downloaded from github. The functionality will be merged into
a new latest/stable release or abandoned.
N.B. The old beta releases have been archived to 'old' but are no
longer included in APT.
Debian's raspi-firmware package assumes the boot partition is mounted as
/boot/firmware/ rather than /boot/. This commit adds support for either
approach by default.
latest and default are links to directories, so follow them.
Before:
/usr/bin/rpi-eeprom-update
BOOTLOADER: up to date
CURRENT: Wed Jan 11 17:40:52 UTC 2023 (1673458852)
LATEST: Thu Jan 1 00:00:00 UTC 1970 (0)
RELEASE: critical (/lib/firmware/raspberrypi/bootloader/critical)
After:
/usr/bin/rpi-eeprom-update
BOOTLOADER: up to date
CURRENT: Wed Jan 11 17:40:52 UTC 2023 (1673458852)
LATEST: Wed Jan 11 17:40:52 UTC 2023 (1673458852)
RELEASE: critical (/lib/firmware/raspberrypi/bootloader/critical)
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
