mirror of
https://github.com/raspberrypi/rpi-eeprom.git
synced 2026-01-20 21:13:36 +08:00
db154d4710
On Raspberry Pi 5 there are dedicated pins for the bootloader SPI EEPROM. This makes it possible to do immediate updates via flashrom. The "current" EEPROM config is the EEPROM config at boot rather than what has just been written to the SPI flash because this is consistent with current behaviour. To use flashrom instead of recovery.bin for bootloader updates set RPI_EEPROM_USE_FLASHROM=1 in /etc/defaults/rpi-eeprom-update BCM2711 On CM4, Pi4, CM4-S, Pi400 config.txt must be modified to disable the analog audio driver which shares the GPIO pins used by the bootloader EEPROM. dtparam=spi=on dtoverlay=audremap dtoverlay=spi-gpio40-45
rpi-eeprom
This repository contains the scripts and pre-compiled binaries used to create the rpi-eeprom package which is used to update the Raspberry Pi 4 and Raspberry Pi 5 bootloaders EEPROM images.
Support
Please check the Raspberry Pi general discussion forum if you have a support question.
Reset to factory defaults
To reset the bootloader back to factory defaults use Raspberry Pi Imager to write an EEPROM update image to a spare SD card. Select Misc utility images under the Operating System tab.