2024-09-24: 2712: Promote 2024-09-23 release (default) (automatic update)

* Allow BANKLOW to be configured by SDRAM_BANKLOW parameter
* Manufacturing test updates

LICENSE

@@ -93,3 +93,25 @@ License: uIP
  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  SUCH DAMAGE.
+ 
+License: MIT
+ QR Code generator library (C)
+ 
+ Copyright (c) Project Nayuki. (MIT License)
+ https://www.nayuki.io/page/qr-code-generator-library
+ 
+ Permission is hereby granted, free of charge, to any person obtaining a copy of
+ this software and associated documentation files (the "Software"), to deal in
+ the Software without restriction, including without limitation the rights to
+ use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ the Software, and to permit persons to whom the Software is furnished to do so,
+ subject to the following conditions:
+ - The above copyright notice and this permission notice shall be included in
+   all copies or substantial portions of the Software.
+ - The Software is provided "as is", without warranty of any kind, express or
+   implied, including but not limited to the warranties of merchantability,
+   fitness for a particular purpose and noninfringement. In no event shall the
+   authors or copyright holders be liable for any claim, damages or other
+   liability, whether in an action of contract, tort or otherwise, arising from,
+   out of or in connection with the Software or the use or other dealings in the
+   Software.

README.md

@@ -11,5 +11,5 @@ To reset the bootloader back to factory defaults use [Raspberry Pi Imager](https
 * [Config.txt boot options](https://www.raspberrypi.com/documentation/computers/config_txt.html#boot-options)
 * [Bootloader EEPROM](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-boot-eeprom)
 * [Bootloader configuration](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-bootloader-configuration)
-* [Updating the Compute Module 4 bootloader](https://www.raspberrypi.com/documentation/computers/compute-module.html#cm4bootloader)
+* [Updating the Compute Module 4 bootloader](https://www.raspberrypi.com/documentation/computers/compute-module.html#update-the-compute-module-bootloader)
 * [Releases and release notes](releases.md)

firmware-2711/release-notes.md

@@ -1,5 +1,43 @@
 # Raspberry Pi4 bootloader EEPROM release notes
 
+## 2024-09-05: Fix self-update if EEPROM is write-protected (latest)
+* arm_dt: Consult the hat_map for all HATs
+* USB boot - ignore RP2 / RP3 MSD device in BOOTSEL mode.
+* recovery.bin - Fix erase_eeprom to not block reboot_recovery
+* Fix self-update to continue to boot instead of retrying forever
+  if the EEPROM is write protected.
+  https://github.com/raspberrypi/rpi-eeprom/issues/597
+
+## 2024-08-14 (recovery.bin) -  Add support for OTP metadata (latest)
+* Update to recovery.bin to output metadata about OTP during rpiboot
+
+## 2024-07-30 - USB boot fixes for CM4-S and interop improvments (latest)
+  * Resolve USB boot regression in 2024-04-17 relase on CM4S
+    See https://github.com/raspberrypi/rpi-eeprom/issues/588
+  * Improve compatibility for booting from some USB SD card readers
+    https://github.com/raspberrypi/rpi-eeprom/issues/527
+
+## 2024-07-05 (recovery.bin) - Enable program_rpioboot_gpio - (latest)
+  * Enable the usage of program_rpiboot_gpio in config.txt for recovery.bin
+    without requiring secure-boot to be enabled.
+    This may be useful CI systems provisioning images on Pi4B / Pi400
+    via RPIBOOT.
+    This is an OTP setting and cannot be reverted after programming.
+
+    See https://www.raspberrypi.com/documentation/computers/config_txt.html#program_rpiboot_gpio
+
+## 2024-05-17 - Ignore bootloader updates for Pi5 on Pi4 - (latest)
+  * Add timestamps to UART log messages.
+  * Add support for [tryboot] conditional the bootloader EEPROM
+    config file.
+    See: https://github.com/raspberrypi/rpi-eeprom/issues/454
+  * Fix MAX_RESTARTS parameter
+    See: https://github.com/raspberrypi/rpi-eeprom/issues/576
+  * Add recovery_reboot option to config.txt for rpiboot which causes
+    the system to reboot after updating the bootloader.
+  * Improve secure-boot OTP provisioning logging.
+  * Fix setting to enable secure-boot mode on Pi4B
+
 ## 2024-04-17 - Build Pi4 firmware from the mainline branch - STABLE
   * Switch to building the Pi4 firmware from the common Pi4/Pi5
     mainline release. This doesn't change the Pi4 features

firmware-2712/release-notes.md

@@ -1,23 +1,91 @@
 # Raspberry Pi5 bootloader EEPROM release notes
 
-2024-04-18: Promote the 2024-04-17 release to the default release (default) (automatic update)
+## 2024-09-24: Promote 2024-09-23 release (default) (automatic update)
+
+## 2024-09-23: SDRAM performance tuning (latest)
+* Allow BANKLOW to be configured by SDRAM_BANKLOW parameter
+* Manufacturing test updates
+
+## 2024-09-11: Promote 2024-09-10 release (default) (automatic update)
+
+## 2024-09-10: Fix lockup on 7" DSI panel clones (latest)
+* Fix lockup regression with some 3rd party 7" DSI panels
+  See: https://github.com/raspberrypi/linux/issues/6341
+
+## 2024-09-05: Fix self-update if EEPROM is write-protected  (latest)
+* arm_dt: Consult the hat_map for all HATs
+* USB boot - ignore RP2 / RP3 MSD device in BOOTSEL mode.
+* recovery.bin - Fix erase_eeprom to not block reboot_recovery
+* Fix self-update to continue to boot instead of retrying forever
+  if the EEPROM is write protected.
+  https://github.com/raspberrypi/rpi-eeprom/issues/597
+
+## 2024-07-30: Promote the 2024-07-30 release to default (default)
+
+## 2024-08-14 - (recovery.bin) Add support for OTP metadata (latest)
+* Update to recovery.bin to output metadata about OTP during rpiboot
+
+## 2024-07-30: Optimized SDRAM timings for Pi5 8GB (latest)
+* Optimize all-banks/per-bank refresh timings for Pi5 8GB
+* Improve compatibility for booting from some USB SD card readers
+    https://github.com/raspberrypi/rpi-eeprom/issues/527
+* Add enable_rp1_uart=1 to config.txt to initialise RP1 UART0 immediately
+  prior to starting the ARMs get earlycon on 40-pin header (pins 14,15)
+  Also requires pciex4_reset=0 in config.txt, and
+  earlycon=pl011,0x1f00030000,115200n8 in cmdline.txt
+
+## 2024-07-25: Support CM4 nEXTRST on CM5 (latest)
+* Drive nEXTRST on CM5 for CM4IO compatibility.
+* Preliminary changes for CM5 Lite.
+
+## 2024-06-11: Promote pieeprom-2024-06-05 to the default release (default)
+
+## 2024-06-05: CM5 bringup changes (latest)
+* Minor changes to support CM5 bringup and test.
+
+## 2024-06-04: Fix [pi5] config.txt conditional state (latest)
+* The [pi5] conditional statement should apply to the entire pi5
+  family i.e. include cm5 as well.
+* Bump SDIO bus priorities so that a GPU/RAM intensive process
+  can't unnecessarily stall I/O.
+* Assorted log message tidyups.
+
+## 2024-05-17: Ignore bootloader updates for Pi5 on Pi4 - (latest)
+* Add timestamps to UART log messages
+
+## 2024-05-13: Add support for NVMe boot with PCIe switches (latest)
+* Add preliminary support for booting NVMe devices behind PCIe switches.
+  See: https://github.com/raspberrypi/firmware/issues/1833
+* Fix MAX_RESTARTS parameter
+  See: https://github.com/raspberrypi/rpi-eeprom/issues/576
+* arm_dt: Support HAT EEPROM dtparams
+* Fix reporting of the partition number via DT
+  See: https://github.com/raspberrypi/rpi-eeprom/issues/575
+* Resolve HID counting bug which caused Network Install to fail on some keyboards
+  See: Fixes https://github.com/raspberrypi/rpi-eeprom/issues/574
+* Pull PCIE DET_WAKE high by default on CM5
+
+## 2024-04-20: Fix SDRAM refesh timing (default) (automatic update)
+* Fix a possible performance regression on Pi5.
+
+## 2024-04-18: Promote the 2024-04-17 release to the default release (default) (automatic update)
 * Select pieeprom-2024-04-17.bin to be the new default release and bump the
   automatic update minimum version to this.
 
-2024-04-18: Update RP1 firmware to extend PCIe L1 entry timeout to 32 us (latest)
+## 2024-04-18: Update RP1 firmware to extend PCIe L1 entry timeout to 32 us (latest)
 * Extend PCIe L1 entry timeout to 32us
   Fix xhci soft reset on link-down
   Set useful xhci compatibility bits in GUCTL
   See https://github.com/raspberrypi/firmware/issues/1877
 
-2024-04-17: Fix TRYBOOT flag in secure-boot mode (latest)
+## 2024-04-17: Fix TRYBOOT flag in secure-boot mode (latest)
 * Fix issue that caused the TRYBOOT flag to be lost in secure-boot mode.
 * dtoverlay: Use %u when converting u32s to strings
    See: https://github.com/raspberrypi/linux/issues/6039
 * Improved debug messages for secure-boot.
 * Generate the bootloader diagnostics qrcode at run time.
 
-2024-04-05: HAT+ fixes for max-current, custom CA cert for net install and enable over-clocking to > 3GHz (latest)
+## 2024-04-05: HAT+ fixes for max-current, custom CA cert for net install and enable over-clocking to > 3GHz (latest)
 * bootloader: clock_2712: Remove restriction on arm_freq <= 3000
   See: https://github.com/raspberrypi/firmware/issues/1876
 * arm_dt: Update max_current to match HAT value
@@ -35,7 +103,7 @@
 * Preliminary support for secure-boot OTP provisioning.
 * Update PCIE DET_WAKE pinmux for D0 products
 
-2024-02-16: u-boot loading and thermal throttling fixes (latest) (default)
+## 2024-02-16: u-boot loading and thermal throttling fixes (latest) (default)
 * arm_loader: Move non-kernels back to 512KB
   See: https://github.com/raspberrypi/firmware/issues/1868
 
@@ -43,26 +111,26 @@
   config.txt frequency.
   See: https://github.com/raspberrypi/rpi-eeprom/issues/518
 
-2024-02-14: Fix vcgencmd otp_dump and implement C(initial_turbo) (latest)
+## 2024-02-14: Fix vcgencmd otp_dump and implement C(initial_turbo) (latest)
 * Fix a regression that caused vcgencmd otp_dump to fail.
 * Implement C(initial_turbo) on Pi5
   See: https://github.com/raspberrypi/firmware/issues/1864
 
-2024-02-08: Adjust SDRAM refresh based on temperature (latest)
+## 2024-02-08: Adjust SDRAM refresh based on temperature (latest)
 
 * Adjust the SDRAM refresh interval based on the temperature. This
   addresses the gap in performance between the 8GB and 4GB variants.
   See https://github.com/raspberrypi/firmware/issues/1854
 * Preliminary support for signed boot.
 
-2024-02-05: Add support for HAT+ POE HATs (latest)
+## 2024-02-05: Add support for HAT+ POE HATs (latest)
 * Add support for probing HAT+ POE HATs
 * Implement DWC3 specific XHCI quirks
 
-2024-01-24: NVMe boot fix for WD NVMe (latest)
+## 2024-01-24: NVMe boot fix for WD NVMe (latest)
 * Add a workaround for an issue seen when booting with WD Blue SN550 NVMe SSD
 
-2024-01-22: Add support for network-install (latest)
+## 2024-01-22: Add support for network-install (latest)
 * Fix issue boot.img end sector check - STABLE
   See:  https://github.com/raspberrypi/rpi-eeprom/issues/521
 * Fix handling of files that use the last cluster in the partition
@@ -70,31 +138,31 @@
 * Fix SD card detection
   See: https://github.com/raspberrypi/rpi-eeprom/issues/523
 
-2024-01-15: Add support for network-install (latest)
+## 2024-01-15: Add support for network-install (latest)
 * Add support for Network Install
 * Preliminary D0 firmware support
 
-2024-01-08: Promote 2024-01-05 to default (automatic update)
+## 2024-01-08: Promote 2024-01-05 to default (automatic update)
 
-2024-01-05: Fix handling of FAT files without LFNs.
+## 2024-01-05: Fix handling of FAT files without LFNs.
 * Fix issues with SFN entries sometimes being treated as LFNs
   see https://github.com/raspberrypi/rpi-eeprom/issues/514
 * Add a dedicated message for "M.2 HAT" not being found instead of
   the generic 'unsupported boot order' message when NVMe boot is
   skipped.
 
-2023-12-17: Promote 2023-12-14 to default release
+## 2023-12-17: Promote 2023-12-14 to default release
 * Bump to the default release now that the partition number fix is confirmed.
 
-2023-12-14: Fix boot partition parameter (latest)
+## 2023-12-14: Fix boot partition parameter (latest)
 * Fix an issue where the boot partition parameter in PM_RSTS was cleared
   before being checked.
   https://github.com/raspberrypi/firmware/issues/1853
 * Add a specific fatal error pattern for RP1 not found - 4 long - 3 short
 
-2023-12-12: Promote 2023-12-06 to default release.
+## 2023-12-12: Promote 2023-12-06 to default release.
 
-2023-12-06: Initialise DWC PHY (latest)
+## 2023-12-06: Initialise DWC PHY (latest)
 
 * Initialise the DWC PHY to enable DWC host+peripheral support under Linux.
   Requires https://github.com/raspberrypi/linux/commit/82069a7a02632aa60fa5c69415bf891ede7d6fd4
@@ -103,7 +171,7 @@
 * Add support for C(arm_min_freq) < 1500 MHz (must be at >= 200 MHz)
 * Manufacturing test updates for DVFS.
 
-2023-11-20: Auto-detect support for PCIe expansion HAT (default + latest)
+## 2023-11-20: Auto-detect support for PCIe expansion HAT (default + latest)
 
 * Add autodetect support for PCIe expansion HATs
 * Add PCIE_PROBE=1 to the EEPROM config for custom PCIe exapansion
@@ -114,14 +182,14 @@
   https://github.com/raspberrypi/firmware/issues/1843
 * Kernel load performance improvement - remove a memcpy
 
-2023-10-30: UPG watchdog support + SD reset fixes (default + latest)
+## 2023-10-30: UPG watchdog support + SD reset fixes (default + latest)
 
 * Fix SDIO / WiFi clock-setup for BOOT_ORDER=0xf14
 * Fix SD power-on-reset
 * Firmware support for improved watchdog driver
 * Update DHCP Option97 to be R,P,i,5 on Pi5
 
-2023-10-18: Display autodetect + HAT gpiomap (default + latest) (automatic update)
+## 2023-10-18: Display autodetect + HAT gpiomap (default + latest) (automatic update)
 
 * Add support for HAT gpiomap for improved HAT compatibility.
 * Add I2C probe for DSI display auto detect
@@ -131,12 +199,12 @@
 * Prevent HDMI diagnostics being displayed immediately when waking after HALT.
 * Update board-name - "Raspberry Pi 5"
 
-2023-09-28: vcgencmd pmic_read_adcs fixes (automatic update)
+## 2023-09-28: vcgencmd pmic_read_adcs fixes (automatic update)
 
 * Fix the LDO names and current scaling codes
 * Manufacturing test updates
 
-2023-09-21: Power button and ACT LED improvements
+## 2023-09-21: Power button and ACT LED improvements
 
 * Fix bug where button press was not monitor for USB-C power supplies
   that were detected as < 3A.
@@ -147,7 +215,7 @@
 * Add support for HAT map.
 
 
-2023-09-13: Initial release
+## 2023-09-13: Initial release
 
 * Initial manufacturing software
 * Network Install is not available in this version

imager/make-imager-release

@@ -8,4 +8,4 @@ script_dir=$(cd "$(dirname "$0")" && pwd)
 ${script_dir}/make-release critical 2023-01-11 000138c0 "${script_dir}/2711-config" release-2711 rpi-boot-eeprom-recovery 2711
 
 # Pi5
-${script_dir}/make-release critical 2024-04-17 "" "${script_dir}/2712-config" release-2712 rpi-boot-eeprom-recovery 2712
+${script_dir}/make-release critical 2024-09-23 "" "${script_dir}/2712-config" release-2712 rpi-boot-eeprom-recovery 2712

imager/make-release

@@ -90,7 +90,6 @@ rm -rf "${output_dir}"
 mkdir "${output_dir}"
 
 # Build the different boot priority flavours
-gen_release "${config_dir}/boot-conf-default.txt" "${output_dir}/${output_basename}-${tag}.zip"
 for variant in sd usb network; do
    gen_release "${config_dir}/boot-conf-${variant}.txt" "${output_dir}/${output_basename}-${tag}-${variant}.zip"
 done

rpi-eeprom-config

@@ -180,7 +180,7 @@ def apply_update(config, eeprom=None, config_src=None):
 
     # If flashrom is used then the command will not return until the EEPROM
     # has been updated so use a larger timeout.
-    shell_cmd(args, timeout=20, echo=True)
+    shell_cmd(args, timeout=60, echo=True)
 
 def edit_config(eeprom=None):
     """

rpi-eeprom-digest

@@ -63,7 +63,7 @@ If a private key in PEM format is supplied then the RSA signature of the
 sha256 digest is included in the .sig file. Currently, the bootloader only
 supports sha256 digests signed with a 2048bit RSA key.
 The bootloader only verifies RSA signatures in signed boot mode
-(not available yet) and only for the EEPROM config file and the signed image.
+and only for the EEPROM config file and the signed image.
 
 Examples:
 

rpi-eeprom-update

@@ -286,7 +286,10 @@ applyRecoveryUpdate()
 
    echo ""
    echo "EEPROM updates pending. Please reboot to apply the update."
-   echo "To cancel a pending update run \"sudo rpi-eeprom-update -r\"."
+
+   if [ "${RPI_EEPROM_USE_FLASHROM}" = 0 ]; then
+      echo "To cancel a pending update run \"sudo rpi-eeprom-update -r\"."
+   fi
 }
 
 applyUpdate() {
@@ -400,7 +403,7 @@ checkDependencies() {
    elif [ $(((0x$BOARD_INFO >> 12) & 15)) = 4 ]; then
       BCM_CHIP=2712
       EEPROM_SIZE=2097152
-      BOOTLOADER_AUTO_UPDATE_MIN_VERSION="${BOOTLOADER_AUTO_UPDATE_MIN_VERSION:-1713358463}"
+      BOOTLOADER_AUTO_UPDATE_MIN_VERSION="${BOOTLOADER_AUTO_UPDATE_MIN_VERSION:-1725975630}"
       SPIDEV=/dev/spidev10.0
       # Default is to use flashrom if availableon BCM2712
       RPI_EEPROM_USE_FLASHROM=${RPI_EEPROM_USE_FLASHROM:-1}