pieeprom: 2024-07-30: 2712: Promote the 2024-07-30 release to default (default)

Update the recovery.bin firmware with support for retrieving
OTP meta-data (e.g. boardrev, mac addr etc) during rpiboot
provisioning.

firmware-2711/release-notes.md

@@ -1,5 +1,23 @@
 # Raspberry Pi4 bootloader EEPROM release notes
 
+## 2024-08-14 (recovery.bin) -  Add support for OTP metadata (latest)
+* Update to recovery.bin to output metadata about OTP during rpiboot
+
+## 2024-07-30 - USB boot fixes for CM4-S and interop improvments (latest)
+  * Resolve USB boot regression in 2024-04-17 relase on CM4S
+    See https://github.com/raspberrypi/rpi-eeprom/issues/588
+  * Improve compatibility for booting from some USB SD card readers
+    https://github.com/raspberrypi/rpi-eeprom/issues/527
+
+## 2024-07-05 (recovery.bin) - Enable program_rpioboot_gpio - (latest)
+  * Enable the usage of program_rpiboot_gpio in config.txt for recovery.bin
+    without requiring secure-boot to be enabled.
+    This may be useful CI systems provisioning images on Pi4B / Pi400
+    via RPIBOOT.
+    This is an OTP setting and cannot be reverted after programming.
+
+    See https://www.raspberrypi.com/documentation/computers/config_txt.html#program_rpiboot_gpio
+
 ## 2024-05-17 - Ignore bootloader updates for Pi5 on Pi4 - (latest)
   * Add timestamps to UART log messages.
   * Add support for [tryboot] conditional the bootloader EEPROM

firmware-2712/release-notes.md

@@ -1,5 +1,23 @@
 # Raspberry Pi5 bootloader EEPROM release notes
 
+## 2024-07-30: Promote the 2024-07-30 release to default (default)
+
+## 2024-08-14 - (recovery.bin) Add support for OTP metadata (latest)
+* Update to recovery.bin to output metadata about OTP during rpiboot
+
+## 2024-07-30: Optimized SDRAM timings for Pi5 8GB (latest)
+* Optimize all-banks/per-bank refresh timings for Pi5 8GB
+* Improve compatibility for booting from some USB SD card readers
+    https://github.com/raspberrypi/rpi-eeprom/issues/527
+* Add enable_rp1_uart=1 to config.txt to initialise RP1 UART0 immediately
+  prior to starting the ARMs get earlycon on 40-pin header (pins 14,15)
+  Also requires pciex4_reset=0 in config.txt
+  earlycon=pl011,0x1f00030000,115200n8
+
+## 2024-07-25: Support CM4 nEXTRST on CM5 (latest)
+* Drive nEXTRST on CM5 for CM4IO compatibility.
+* Preliminary changes for CM5 Lite.
+
 ## 2024-06-11: Promote pieeprom-2024-06-05 to the default release (default)
 
 ## 2024-06-05: CM5 bringup changes (latest)
@@ -15,7 +33,7 @@
 ## 2024-05-17: Ignore bootloader updates for Pi5 on Pi4 - (latest)
 * Add timestamps to UART log messages
 
-2024-05-13: Add support for NVMe boot with PCIe switches (latest)
+## 2024-05-13: Add support for NVMe boot with PCIe switches (latest)
 * Add preliminary support for booting NVMe devices behind PCIe switches.
   See: https://github.com/raspberrypi/firmware/issues/1833
 * Fix MAX_RESTARTS parameter
@@ -27,27 +45,27 @@
   See: Fixes https://github.com/raspberrypi/rpi-eeprom/issues/574
 * Pull PCIE DET_WAKE high by default on CM5
 
-2024-04-20: Fix SDRAM refesh timing (default) (automatic update)
+## 2024-04-20: Fix SDRAM refesh timing (default) (automatic update)
 * Fix a possible performance regression on Pi5.
 
-2024-04-18: Promote the 2024-04-17 release to the default release (default) (automatic update)
+## 2024-04-18: Promote the 2024-04-17 release to the default release (default) (automatic update)
 * Select pieeprom-2024-04-17.bin to be the new default release and bump the
   automatic update minimum version to this.
 
-2024-04-18: Update RP1 firmware to extend PCIe L1 entry timeout to 32 us (latest)
+## 2024-04-18: Update RP1 firmware to extend PCIe L1 entry timeout to 32 us (latest)
 * Extend PCIe L1 entry timeout to 32us
   Fix xhci soft reset on link-down
   Set useful xhci compatibility bits in GUCTL
   See https://github.com/raspberrypi/firmware/issues/1877
 
-2024-04-17: Fix TRYBOOT flag in secure-boot mode (latest)
+## 2024-04-17: Fix TRYBOOT flag in secure-boot mode (latest)
 * Fix issue that caused the TRYBOOT flag to be lost in secure-boot mode.
 * dtoverlay: Use %u when converting u32s to strings
    See: https://github.com/raspberrypi/linux/issues/6039
 * Improved debug messages for secure-boot.
 * Generate the bootloader diagnostics qrcode at run time.
 
-2024-04-05: HAT+ fixes for max-current, custom CA cert for net install and enable over-clocking to > 3GHz (latest)
+## 2024-04-05: HAT+ fixes for max-current, custom CA cert for net install and enable over-clocking to > 3GHz (latest)
 * bootloader: clock_2712: Remove restriction on arm_freq <= 3000
   See: https://github.com/raspberrypi/firmware/issues/1876
 * arm_dt: Update max_current to match HAT value
@@ -65,7 +83,7 @@
 * Preliminary support for secure-boot OTP provisioning.
 * Update PCIE DET_WAKE pinmux for D0 products
 
-2024-02-16: u-boot loading and thermal throttling fixes (latest) (default)
+## 2024-02-16: u-boot loading and thermal throttling fixes (latest) (default)
 * arm_loader: Move non-kernels back to 512KB
   See: https://github.com/raspberrypi/firmware/issues/1868
 
@@ -73,26 +91,26 @@
   config.txt frequency.
   See: https://github.com/raspberrypi/rpi-eeprom/issues/518
 
-2024-02-14: Fix vcgencmd otp_dump and implement C(initial_turbo) (latest)
+## 2024-02-14: Fix vcgencmd otp_dump and implement C(initial_turbo) (latest)
 * Fix a regression that caused vcgencmd otp_dump to fail.
 * Implement C(initial_turbo) on Pi5
   See: https://github.com/raspberrypi/firmware/issues/1864
 
-2024-02-08: Adjust SDRAM refresh based on temperature (latest)
+## 2024-02-08: Adjust SDRAM refresh based on temperature (latest)
 
 * Adjust the SDRAM refresh interval based on the temperature. This
   addresses the gap in performance between the 8GB and 4GB variants.
   See https://github.com/raspberrypi/firmware/issues/1854
 * Preliminary support for signed boot.
 
-2024-02-05: Add support for HAT+ POE HATs (latest)
+## 2024-02-05: Add support for HAT+ POE HATs (latest)
 * Add support for probing HAT+ POE HATs
 * Implement DWC3 specific XHCI quirks
 
-2024-01-24: NVMe boot fix for WD NVMe (latest)
+## 2024-01-24: NVMe boot fix for WD NVMe (latest)
 * Add a workaround for an issue seen when booting with WD Blue SN550 NVMe SSD
 
-2024-01-22: Add support for network-install (latest)
+## 2024-01-22: Add support for network-install (latest)
 * Fix issue boot.img end sector check - STABLE
   See:  https://github.com/raspberrypi/rpi-eeprom/issues/521
 * Fix handling of files that use the last cluster in the partition
@@ -100,31 +118,31 @@
 * Fix SD card detection
   See: https://github.com/raspberrypi/rpi-eeprom/issues/523
 
-2024-01-15: Add support for network-install (latest)
+## 2024-01-15: Add support for network-install (latest)
 * Add support for Network Install
 * Preliminary D0 firmware support
 
-2024-01-08: Promote 2024-01-05 to default (automatic update)
+## 2024-01-08: Promote 2024-01-05 to default (automatic update)
 
-2024-01-05: Fix handling of FAT files without LFNs.
+## 2024-01-05: Fix handling of FAT files without LFNs.
 * Fix issues with SFN entries sometimes being treated as LFNs
   see https://github.com/raspberrypi/rpi-eeprom/issues/514
 * Add a dedicated message for "M.2 HAT" not being found instead of
   the generic 'unsupported boot order' message when NVMe boot is
   skipped.
 
-2023-12-17: Promote 2023-12-14 to default release
+## 2023-12-17: Promote 2023-12-14 to default release
 * Bump to the default release now that the partition number fix is confirmed.
 
-2023-12-14: Fix boot partition parameter (latest)
+## 2023-12-14: Fix boot partition parameter (latest)
 * Fix an issue where the boot partition parameter in PM_RSTS was cleared
   before being checked.
   https://github.com/raspberrypi/firmware/issues/1853
 * Add a specific fatal error pattern for RP1 not found - 4 long - 3 short
 
-2023-12-12: Promote 2023-12-06 to default release.
+## 2023-12-12: Promote 2023-12-06 to default release.
 
-2023-12-06: Initialise DWC PHY (latest)
+## 2023-12-06: Initialise DWC PHY (latest)
 
 * Initialise the DWC PHY to enable DWC host+peripheral support under Linux.
   Requires https://github.com/raspberrypi/linux/commit/82069a7a02632aa60fa5c69415bf891ede7d6fd4
@@ -133,7 +151,7 @@
 * Add support for C(arm_min_freq) < 1500 MHz (must be at >= 200 MHz)
 * Manufacturing test updates for DVFS.
 
-2023-11-20: Auto-detect support for PCIe expansion HAT (default + latest)
+## 2023-11-20: Auto-detect support for PCIe expansion HAT (default + latest)
 
 * Add autodetect support for PCIe expansion HATs
 * Add PCIE_PROBE=1 to the EEPROM config for custom PCIe exapansion
@@ -144,14 +162,14 @@
   https://github.com/raspberrypi/firmware/issues/1843
 * Kernel load performance improvement - remove a memcpy
 
-2023-10-30: UPG watchdog support + SD reset fixes (default + latest)
+## 2023-10-30: UPG watchdog support + SD reset fixes (default + latest)
 
 * Fix SDIO / WiFi clock-setup for BOOT_ORDER=0xf14
 * Fix SD power-on-reset
 * Firmware support for improved watchdog driver
 * Update DHCP Option97 to be R,P,i,5 on Pi5
 
-2023-10-18: Display autodetect + HAT gpiomap (default + latest) (automatic update)
+## 2023-10-18: Display autodetect + HAT gpiomap (default + latest) (automatic update)
 
 * Add support for HAT gpiomap for improved HAT compatibility.
 * Add I2C probe for DSI display auto detect
@@ -161,12 +179,12 @@
 * Prevent HDMI diagnostics being displayed immediately when waking after HALT.
 * Update board-name - "Raspberry Pi 5"
 
-2023-09-28: vcgencmd pmic_read_adcs fixes (automatic update)
+## 2023-09-28: vcgencmd pmic_read_adcs fixes (automatic update)
 
 * Fix the LDO names and current scaling codes
 * Manufacturing test updates
 
-2023-09-21: Power button and ACT LED improvements
+## 2023-09-21: Power button and ACT LED improvements
 
 * Fix bug where button press was not monitor for USB-C power supplies
   that were detected as < 3A.
@@ -177,7 +195,7 @@
 * Add support for HAT map.
 
 
-2023-09-13: Initial release
+## 2023-09-13: Initial release
 
 * Initial manufacturing software
 * Network Install is not available in this version

rpi-eeprom-digest

@@ -63,7 +63,7 @@ If a private key in PEM format is supplied then the RSA signature of the
 sha256 digest is included in the .sig file. Currently, the bootloader only
 supports sha256 digests signed with a 2048bit RSA key.
 The bootloader only verifies RSA signatures in signed boot mode
-(not available yet) and only for the EEPROM config file and the signed image.
+and only for the EEPROM config file and the signed image.
 
 Examples:
 

rpi-eeprom-update

@@ -286,7 +286,10 @@ applyRecoveryUpdate()
 
    echo ""
    echo "EEPROM updates pending. Please reboot to apply the update."
-   echo "To cancel a pending update run \"sudo rpi-eeprom-update -r\"."
+
+   if [ "${RPI_EEPROM_USE_FLASHROM}" = 0 ]; then
+      echo "To cancel a pending update run \"sudo rpi-eeprom-update -r\"."
+   fi
 }
 
 applyUpdate() {