16.1-1 release

* Update VL805 to 138C0 - fix for handling of split transactions
  https://github.com/raspberrypi/linux/pull/5262
* Fix HID error handling with network install
  https://github.com/raspberrypi/rpi-eeprom/issues/458

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -6,7 +6,7 @@ body:
     value: |
       **Is this the right place for my bug report?**
       
-      * This repository contains the Raspberry Pi 5, Raspberry Pi 4, Pi400, CM4 and CM4-S bootloader EEPROM images and installation scripts.      
+      * This repository contains the Raspberry Pi 4, Pi400 and CM4 bootloader EEPROM images and installation scripts.      
       * Please report boot issues for the earlier models at the GPU firmware repo [github.com/raspberrypi/firmware](https://github.com/raspberrypi/firmware).
       * Please report USB issues which occur after the OS has started at the Linux repo [github.com/raspberrypi/linux/](https://github.com/raspberrypi/linux/).
       * If you simply have a question, then [the Raspberry Pi forums](https://www.raspberrypi.org/forums) are the best place to ask it. 
@@ -39,15 +39,10 @@ body:
     description: On which device you are facing the bug?
     multiple: true
     options:
-      - Raspberry Pi 5
-      - Raspberry Pi 500
       - Raspberry Pi 4 Mod. B
       - Raspberry Pi 400
-      - Raspberry Pi CM5
-      - Raspberry Pi CM5 Lite
       - Raspberry Pi CM4
       - Raspberry Pi CM4 Lite
-      - Raspberry Pi CM4-S
       - Other
   validations:
     required: true
@@ -57,7 +52,7 @@ body:
   attributes:
     label: Bootloader configuration.
     description: |      
-      Copy and paste the results of `rpi-eeprom-config` or describe the failing configuration.
+      Copy and paste the results of `vcgencmd bootloader_config` or describe the failing configuration.
       
       * `rpi-eeprom-update` saves a backup of the previous bootloader configuration to `/var/lib/raspberrypi/bootloader/backup` before it schedules the update.
       * `rpi-eeprom-config pieeprom.upd` can be used to read the contents of an EEPROM image.
@@ -83,7 +78,7 @@ body:
   attributes:
     label: Bootloader logs
     description: |
-       If the problem can't be diagnosed from the bootloader HDMI diagnostics screen then we'll normally need to see more detailed logs to diagnose the problem. The bootloader and GPU firmware can be configured to enable log output to the UART (GPIOs `14` and `15`, pins `8` and `10` on the [40-pin GPIO header](https://www.raspberrypi.com/documentation/computers/os.html#gpio-and-the-40-pin-header, or on the Debug header on a Pi 5)
+       If the problem can't be diagnosed from the bootloader HDMI diagnostics screen then we'll normally need to see more detailed logs to diagnose the problem. The bootloader and GPU firmware can be configured to enable log output to the UART pins `14` and `15` on the [40-pin GPIO header](https://www.raspberrypi.com/documentation/computers/os.html#gpio-and-the-40-pin-header)
          * To enable UART logging from the bootloader specify [BOOT_UART=1](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#BOOT_UART) in the EEPROM config
          * To enable UART logging from the `start.elf` GPU firmware stage add [uart_2ndstage=1](https://www.raspberrypi.com/documentation/computers/config_txt.html#uart_2ndstage) to `config.txt`.
          * If you are familiar with using Wireshark then it's also possible to use [NETCONSOLE](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#NETCONSOLE) write logs to UDP packets.

.github/workflows/test.yml

@@ -1,31 +0,0 @@
-name: Test EEPROM Config
-
-on:
-  pull_request:
-    branches: [ 'master' ]
-
-jobs:
-  test:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      
-      - name: Set up Python
-        uses: actions/setup-python@v4
-        with:
-          python-version: '3.x'
-          
-      - name: Create and activate virtual environment
-        run: |
-          python -m venv venv
-          source venv/bin/activate
-          
-      - name: Install dependencies
-        run: |
-          pip install pycryptodomex
-      
-      - name: Run EEPROM Config Tests
-        run: |
-          cd test
-          chmod +x test-rpi-eeprom-config
-          ./test-rpi-eeprom-config 

.gitignore

@@ -1,3 +1 @@
 *.swp
-images-2711/
-images-2712/

LICENSE

@@ -6,14 +6,10 @@ Files: *
 Copyright: 2019, Raspberry Pi (Trading) Ltd.
 License: BSD-3
 
-Files: firmware-2711/*
+Files: firmware/*
 Copyright: 2019, Raspberry Pi (Trading) Ltd.
 License: custom
 
-Files: firmware-2712/*
-Copyright: 2024, Raspberry Pi (Trading) Ltd.
-License: custom
-
 License: BSD-3
  Redistribution and use in source and binary forms, with or without
  modification, are permitted provided that the following conditions
@@ -97,25 +93,3 @@ License: uIP
  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  SUCH DAMAGE.
- 
-License: MIT
- QR Code generator library (C)
- 
- Copyright (c) Project Nayuki. (MIT License)
- https://www.nayuki.io/page/qr-code-generator-library
- 
- Permission is hereby granted, free of charge, to any person obtaining a copy of
- this software and associated documentation files (the "Software"), to deal in
- the Software without restriction, including without limitation the rights to
- use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
- the Software, and to permit persons to whom the Software is furnished to do so,
- subject to the following conditions:
- - The above copyright notice and this permission notice shall be included in
-   all copies or substantial portions of the Software.
- - The Software is provided "as is", without warranty of any kind, express or
-   implied, including but not limited to the warranties of merchantability,
-   fitness for a particular purpose and noninfringement. In no event shall the
-   authors or copyright holders be liable for any claim, damages or other
-   liability, whether in an action of contract, tort or otherwise, arising from,
-   out of or in connection with the Software or the use or other dealings in the
-   Software.

README.md

@@ -1,5 +1,5 @@
 # rpi-eeprom
-This repository contains the scripts and pre-compiled binaries used to create the `rpi-eeprom` package which is used to update the Raspberry Pi 4 and Raspberry Pi 5 bootloaders EEPROM images.
+This repository contains the scripts and pre-compiled binaries used to create the `rpi-eeprom` package which is used to update the Raspberry Pi 4 bootloader and VLI USB controller EEPROMs.
 
 # Support
 Please check the Raspberry Pi [general discussion forum](https://forums.raspberrypi.com/viewforum.php?f=63) if you have a support question.
@@ -9,7 +9,8 @@ To reset the bootloader back to factory defaults use [Raspberry Pi Imager](https
 
 # Bootloader documentation
 * [Config.txt boot options](https://www.raspberrypi.com/documentation/computers/config_txt.html#boot-options)
-* [Bootloader EEPROM](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-boot-eeprom)
-* [Bootloader configuration](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-bootloader-configuration)
-* [Updating the Compute Module 4 bootloader](https://www.raspberrypi.com/documentation/computers/compute-module.html#update-the-compute-module-bootloader)
-* [Releases and release notes](releases.md)
+* [Bootloader EEPROM](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-4-boot-eeprom)
+* [Bootloader configuration](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-4-bootloader-configuration)
+* [Updating the Compute Module 4 bootloader](https://www.raspberrypi.com/documentation/computers/compute-module.html#cm4bootloader)
+* [Release notes](firmware/release-notes.md)
+* [Releases](releases.md)

debian/.gitignore

@@ -0,0 +1,9 @@
+.debhelper/
+debhelper-build-stamp
+files
+rpi-eeprom/
+rpi-eeprom-images/
+*.debhelper.log
+*.debhelper
+*.substvars
+*.1

debian/LICENCE.bootloader

@@ -0,0 +1,28 @@
+Copyright (c) 2019, Raspberry Pi (Trading) Ltd.
+All rights reserved.
+
+Redistribution.  Redistribution and use in binary form, without
+modification, are permitted provided that the following conditions are
+met:
+
+* This software may only be used for the purposes of developing for,
+  running or using a Raspberry Pi device.
+* Redistributions must reproduce the above copyright notice and the
+  following disclaimer in the documentation and/or other materials
+  provided with the distribution.
+* Neither the name of the copyright holder nor the names of its
+  contributors may be used to endorse or promote products derived
+  from this software without specific prior written permission.
+
+DISCLAIMER.  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
+BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGE. 

debian/compat

@@ -0,0 +1 @@
+11

debian/control

@@ -0,0 +1,29 @@
+Source: rpi-eeprom
+Section: misc
+Priority: optional
+Maintainer: Serge Schneider <serge@raspberrypi.org>
+Build-Depends: debhelper (>= 11), help2man, python3-minimal
+Standards-Version: 4.1.3
+Homepage: https://github.com/raspberrypi/rpi-eeprom/
+Vcs-Browser: https://github.com/raspberrypi/rpi-eeprom/
+Vcs-Git: https://github.com/raspberrypi/rpi-eeprom.git
+
+Package: rpi-eeprom
+Architecture: armhf arm64
+Depends: ${shlibs:Depends}, ${misc:Depends}, libraspberrypi-bin, python3,
+ binutils, raspberrypi-bootloader (>= 1.20190819), pciutils
+Breaks: rpi-eeprom-images (<<7.2)
+Replaces: rpi-eeprom-images (<<7.2)
+Recommends: flashrom
+Provides: rpi-eeprom-images
+Description: Raspberry Pi 4 boot EEPROM updater
+ Checks whether the Raspberry Pi bootloader EEPROM is up-to-date and updates
+ the EEPROM.
+
+Package: rpi-eeprom-images
+Architecture: armhf arm64
+Depends: ${misc:Depends}, rpi-eeprom (>=7.2)
+Priority: optional
+Section: oldlibs
+Description: transitional package
+ This is a transitional package. It can safely be removed.

debian/copyright

@@ -0,0 +1 @@
+../LICENSE

debian/default/rpi-eeprom-update

@@ -0,0 +1 @@
+FIRMWARE_RELEASE_STATUS="default"

debian/gbp.conf

@@ -0,0 +1,3 @@
+[DEFAULT]
+upstream-tree = master
+debian-branch = debian/bullseye

debian/rpi-eeprom.docs

@@ -0,0 +1,2 @@
+debian/LICENCE.bootloader
+firmware/release-notes.md

debian/rpi-eeprom.install

@@ -0,0 +1,12 @@
+rpi-eeprom-config usr/bin/
+rpi-eeprom-update usr/bin/
+rpi-eeprom-digest usr/bin/
+debian/default/ etc/
+
+firmware/default lib/firmware/raspberrypi/bootloader/
+firmware/latest lib/firmware/raspberrypi/bootloader/
+
+firmware/critical lib/firmware/raspberrypi/bootloader/
+firmware/stable lib/firmware/raspberrypi/bootloader/
+firmware/beta lib/firmware/raspberrypi/bootloader/
+firmware/release-notes.md lib/firmware/raspberrypi/bootloader/

debian/rpi-eeprom.manpages

@@ -0,0 +1,2 @@
+debian/rpi-eeprom-update.1
+debian/rpi-eeprom-config.1

debian/rpi-eeprom.postinst

@@ -0,0 +1,39 @@
+#!/bin/sh
+# postinst script for rpi-eeprom
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postinst> `configure' <most-recently-configured-version>
+#        * <old-postinst> `abort-upgrade' <new version>
+#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+#          <new-version>
+#        * <postinst> `abort-remove'
+#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+#          <failed-install-package> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see https://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    configure)
+    ;;
+
+    abort-upgrade|abort-remove|abort-deconfigure)
+    ;;
+
+    *)
+        echo "postinst called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/rpi-eeprom.postrm

@@ -0,0 +1,40 @@
+#!/bin/sh
+# postrm script for rpi-eeprom
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <postrm> `remove'
+#        * <postrm> `purge'
+#        * <old-postrm> `upgrade' <new-version>
+#        * <new-postrm> `failed-upgrade' <old-version>
+#        * <new-postrm> `abort-install'
+#        * <new-postrm> `abort-install' <old-version>
+#        * <new-postrm> `abort-upgrade' <old-version>
+#        * <disappearer's-postrm> `disappear' <overwriter>
+#          <overwriter-version>
+# for details, see https://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    purge)
+        rm -rf /var/lib/raspberrypi/bootloader/backup/
+    ;;
+    remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+    ;;
+
+    *)
+        echo "postrm called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/rpi-eeprom.prerm

@@ -0,0 +1,38 @@
+#!/bin/sh
+# prerm script for rpi-eeprom
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+#        * <prerm> `remove'
+#        * <old-prerm> `upgrade' <new-version>
+#        * <new-prerm> `failed-upgrade' <old-version>
+#        * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
+#        * <deconfigured's-prerm> `deconfigure' `in-favour'
+#          <package-being-installed> <version> `removing'
+#          <conflicting-package> <version>
+# for details, see https://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+    remove|upgrade|deconfigure)
+    ;;
+
+    failed-upgrade)
+    ;;
+
+    *)
+        echo "prerm called with unknown argument \`$1'" >&2
+        exit 1
+    ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0

debian/rpi-eeprom.rpi-eeprom-update.service

@@ -0,0 +1,11 @@
+[Unit]
+Description=Check for Raspberry Pi EEPROM updates
+After=boot.mount
+
+[Service]
+Type=oneshot
+RemainAfterExit=true
+ExecStart=/usr/bin/rpi-eeprom-update -s -a
+
+[Install]
+WantedBy=multi-user.target

debian/rules

@@ -0,0 +1,27 @@
+#!/usr/bin/make -f
+#export DH_VERBOSE = 1
+
+include /usr/share/dpkg/pkg-info.mk
+
+%:
+	dh $@
+
+override_dh_installsystemd:
+	dh_installsystemd --name=rpi-eeprom-update
+
+override_dh_auto_build: debian/rpi-eeprom-update.1 debian/rpi-eeprom-config.1
+
+override_dh_install:
+	mkdir -p debian/rpi-eeprom/var/lib/raspberrypi/bootloader/backup/
+	dh_install
+
+debian/rpi-eeprom-update.1:
+	help2man -N --version-string="${DEB_VERSION_UPSTREAM}" --help-option="-h" \
+		--name="Checks whether the Raspberry Pi bootloader EEPROM is \
+up-to-date and updates the EEPROM" \
+		--output=$@ ./rpi-eeprom-update
+
+debian/rpi-eeprom-config.1:
+	help2man -N --version-string="${DEB_VERSION_UPSTREAM}" --help-option="-h" \
+		--name="Bootloader EEPROM configuration tool for the Raspberry Pi 4B" \
+		--output=$@ ./rpi-eeprom-config

debian/source/format

@@ -0,0 +1 @@
+3.0 (quilt)

debian/source/lintian-overrides

@@ -0,0 +1 @@
+debian-copyright-is-symlink

firmware-2711/beta

@@ -1 +0,0 @@
-latest/

firmware-2711/critical

@@ -1 +0,0 @@
-default/

firmware-2711/stable

@@ -1 +0,0 @@
-latest/

firmware-2712/beta

@@ -1 +0,0 @@
-latest

firmware-2712/critical

@@ -1 +0,0 @@
-default