mirror of
https://github.com/raspberrypi/rpi-eeprom.git
synced 2026-01-20 21:13:36 +08:00
68774da0be
* helpers/config_loader: Also support bootvar0 eeprom config on Pi4 This allows an eeprom config setting (e.g. BOOTARG0=0x10) to be set on a board which config.txt can use as a conditional expression (e.g. [bootarg0&0x10]). * pi5: Write over-voltage config to the UART log Write the high level over-voltage configuration to the UART log for diagnostic purposes. * Stop partition-walk after boot-mode timeout/retries limit Fix a fatal assert with USB boot where the partition walk could be retried after the USB timeout/retry limit had been reached. See: https://github.com/raspberrypi/rpi-eeprom/issues/776 * rpiboot: Extend metadata to report status of operations Report success/fail status of recovery operations based on config.txt settings
rpi-eeprom
This repository contains the scripts and pre-compiled binaries used to create the rpi-eeprom package which is used to update the Raspberry Pi 4 and Raspberry Pi 5 bootloaders EEPROM images.
Support
Please check the Raspberry Pi general discussion forum if you have a support question.
Reset to factory defaults
To reset the bootloader back to factory defaults use Raspberry Pi Imager to write an EEPROM update image to a spare SD card. Select Misc utility images under the Operating System tab.