mirror of
https://github.com/raspberrypi/rpi-eeprom.git
synced 2026-01-20 21:13:36 +08:00
3b393d31ac
* Add support for HAT gpiomap for improved HAT compatibility. * Add I2C probe for DSI display auto detect * Automatically set dtparam=nvme if booted from nvme * Fix network boot reset issue where only the first attempt works. * Adding pciex4_reset=0 to config.txt will leave RP1 PCIe enabled when ARM stage is started. * Prevent HDMI diagnostics being displayed immediately when waking after HALT. * Update board-name - "Rasberry Pi 5"
39 lines
1.6 KiB
Markdown
39 lines
1.6 KiB
Markdown
# Raspberry Pi5 bootloader EEPROM release notes
|
|
|
|
2023-10-18: Display autodetect + HAT gpiomap (default + latest)
|
|
|
|
* Add support for HAT gpiomap for improved HAT compatibility.
|
|
* Add I2C probe for DSI display auto detect
|
|
* Automatically set dtparam=nvme if booted from nvme
|
|
* Fix network boot reset issue where only the first attempt works.
|
|
* Adding pciex4_reset=0 to config.txt will leave RP1 PCIe enabled when ARM stage is started.
|
|
* Prevent HDMI diagnostics being displayed immediately when waking after HALT.
|
|
* Update board-name - "Rasberry Pi 5"
|
|
|
|
2023-09-28: vcgencmd pmic_read_adcs fixes (automatic update)
|
|
|
|
* Fix the LDO names and current scaling codes
|
|
* Manufacturing test updates
|
|
|
|
2023-09-21: Power button and ACT LED improvements
|
|
|
|
* Fix bug where button press was not monitor for USB-C power supplies
|
|
that were detected as < 3A.
|
|
* In USB boot mode automatically select max-current during a reboot
|
|
(but not power on reset) to improve OS installation experience.
|
|
* USB-MSD stability improvements
|
|
* Remove the HALT error pattern and go to halt/standby immediately.
|
|
* Add support for HAT map.
|
|
|
|
|
|
2023-09-13: Initial release
|
|
|
|
* Initial manufacturing software
|
|
* Network Install is not available in this version
|
|
* rpi-eeprom-update uses self-update on Pi5 rather than recovery.bin.
|
|
so that the update mechanism is the same on all boot-modes and the
|
|
boot file-system is never modified by the firmware/recovery.bin.
|
|
recovery.bin is still used by RPi Imager - bootloader update SD card images.
|
|
* Pi4 and Pi4 bootloader images and recovery.bin are not compatible.
|
|
The 2711/2712 boot ROM ignores incompatible recovery.bin files.
|