mirror of
https://github.com/raspberrypi/rpi-eeprom.git
synced 2026-01-20 21:13:36 +08:00
105 lines
4.4 KiB
Markdown
105 lines
4.4 KiB
Markdown
# Raspberry Pi5 bootloader EEPROM release notes
|
|
|
|
2024-02-05: Add support for HAT+ POE HATs (latest)
|
|
* Add support for probing HAT+ POE HATs
|
|
* Implement DWC3 specific XHCI quirks
|
|
|
|
2024-01-24: NVMe boot fix for WD NVMe (latest)
|
|
* Add a workaround for an issue seen when booting with WD Blue SN550 NVMe SSD
|
|
|
|
2024-01-22: Add support for network-install (latest)
|
|
* Fix issue boot.img end sector check - STABLE
|
|
See: https://github.com/raspberrypi/rpi-eeprom/issues/521
|
|
* Fix handling of files that use the last cluster in the partition
|
|
See: https://github.com/raspberrypi/rpi-eeprom/issues/521
|
|
* Fix SD card detection
|
|
See: https://github.com/raspberrypi/rpi-eeprom/issues/523
|
|
|
|
2024-01-15: Add support for network-install (latest)
|
|
* Add support for Network Install
|
|
* Preliminary D0 firmware support
|
|
|
|
2024-01-08: Promote 2024-01-05 to default (automatic update)
|
|
|
|
2024-01-05: Fix handling of FAT files without LFNs.
|
|
* Fix issues with SFN entries sometimes being treated as LFNs
|
|
see https://github.com/raspberrypi/rpi-eeprom/issues/514
|
|
* Add a dedicated message for "M.2 HAT" not being found instead of
|
|
the generic 'unsupported boot order' message when NVMe boot is
|
|
skipped.
|
|
|
|
2023-12-17: Promote 2023-12-14 to default release
|
|
* Bump to the default release now that the partition number fix is confirmed.
|
|
|
|
2023-12-14: Fix boot partition parameter (latest)
|
|
* Fix an issue where the boot partition parameter in PM_RSTS was cleared
|
|
before being checked.
|
|
https://github.com/raspberrypi/firmware/issues/1853
|
|
* Add a specific fatal error pattern for RP1 not found - 4 long - 3 short
|
|
|
|
2023-12-12: Promote 2023-12-06 to default release.
|
|
|
|
2023-12-06: Initialise DWC PHY (latest)
|
|
|
|
* Initialise the DWC PHY to enable DWC host+peripheral support under Linux.
|
|
Requires https://github.com/raspberrypi/linux/commit/82069a7a02632aa60fa5c69415bf891ede7d6fd4
|
|
* Force PWM on 3V3 supply if cameras or HATs are connected or if power_force_3v3_pwm=1 in config.txt
|
|
Resolves an image quality issue with the GS camera.
|
|
* Add support for C(arm_min_freq) < 1500 MHz (must be at >= 200 MHz)
|
|
* Manufacturing test updates for DVFS.
|
|
|
|
2023-11-20: Auto-detect support for PCIe expansion HAT (default + latest)
|
|
|
|
* Add autodetect support for PCIe expansion HATs
|
|
* Add PCIE_PROBE=1 to the EEPROM config for custom PCIe exapansion
|
|
designs that do not support the upcoming HAT spec. This gives
|
|
similar behaviour to CM4 where PCIe x1 is enumerated to discover NVMe
|
|
devices.
|
|
* Fix loading of multiple initramfs images that are not 32-bit aligned sizes
|
|
https://github.com/raspberrypi/firmware/issues/1843
|
|
* Kernel load performance improvement - remove a memcpy
|
|
|
|
2023-10-30: UPG watchdog support + SD reset fixes (default + latest)
|
|
|
|
* Fix SDIO / WiFi clock-setup for BOOT_ORDER=0xf14
|
|
* Fix SD power-on-reset
|
|
* Firmware support for improved watchdog driver
|
|
* Update DHCP Option97 to be R,P,i,5 on Pi5
|
|
|
|
2023-10-18: Display autodetect + HAT gpiomap (default + latest) (automatic update)
|
|
|
|
* Add support for HAT gpiomap for improved HAT compatibility.
|
|
* Add I2C probe for DSI display auto detect
|
|
* Automatically set dtparam=nvme if booted from nvme
|
|
* Fix network boot reset issue where only the first attempt works.
|
|
* Adding pciex4_reset=0 to config.txt will leave RP1 PCIe enabled when ARM stage is started.
|
|
* Prevent HDMI diagnostics being displayed immediately when waking after HALT.
|
|
* Update board-name - "Raspberry Pi 5"
|
|
|
|
2023-09-28: vcgencmd pmic_read_adcs fixes (automatic update)
|
|
|
|
* Fix the LDO names and current scaling codes
|
|
* Manufacturing test updates
|
|
|
|
2023-09-21: Power button and ACT LED improvements
|
|
|
|
* Fix bug where button press was not monitor for USB-C power supplies
|
|
that were detected as < 3A.
|
|
* In USB boot mode automatically select max-current during a reboot
|
|
(but not power on reset) to improve OS installation experience.
|
|
* USB-MSD stability improvements
|
|
* Remove the HALT error pattern and go to halt/standby immediately.
|
|
* Add support for HAT map.
|
|
|
|
|
|
2023-09-13: Initial release
|
|
|
|
* Initial manufacturing software
|
|
* Network Install is not available in this version
|
|
* rpi-eeprom-update uses self-update on Pi5 rather than recovery.bin.
|
|
so that the update mechanism is the same on all boot-modes and the
|
|
boot file-system is never modified by the firmware/recovery.bin.
|
|
recovery.bin is still used by RPi Imager - bootloader update SD card images.
|
|
* Pi4 and Pi4 bootloader images and recovery.bin are not compatible.
|
|
The 2711/2712 boot ROM ignores incompatible recovery.bin files.
|