image: 2712: Update config for POWER_OFF_ON_HALT and NET_INSTALL_AT_POWER_ON

* The 2024-11-12 automatically sets the POWER_OFF_ON_HALT property
  according to the board-type so remove the override network install
  images.
* Set NET_INSTALL_AT_POWER_ON=1 by default which briefly display
  the network-install / boot-menu UI after a cold power-on.
  This can be switched off by removing the line
  either via "rpi-eeprom-config --edit" or the new menu in raspi-config
  Advanced Options.

LICENSE

@@ -93,3 +93,25 @@ License: uIP
  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  SUCH DAMAGE.
+ 
+License: MIT
+ QR Code generator library (C)
+ 
+ Copyright (c) Project Nayuki. (MIT License)
+ https://www.nayuki.io/page/qr-code-generator-library
+ 
+ Permission is hereby granted, free of charge, to any person obtaining a copy of
+ this software and associated documentation files (the "Software"), to deal in
+ the Software without restriction, including without limitation the rights to
+ use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
+ the Software, and to permit persons to whom the Software is furnished to do so,
+ subject to the following conditions:
+ - The above copyright notice and this permission notice shall be included in
+   all copies or substantial portions of the Software.
+ - The Software is provided "as is", without warranty of any kind, express or
+   implied, including but not limited to the warranties of merchantability,
+   fitness for a particular purpose and noninfringement. In no event shall the
+   authors or copyright holders be liable for any claim, damages or other
+   liability, whether in an action of contract, tort or otherwise, arising from,
+   out of or in connection with the Software or the use or other dealings in the
+   Software.

README.md

@@ -11,5 +11,5 @@ To reset the bootloader back to factory defaults use [Raspberry Pi Imager](https
 * [Config.txt boot options](https://www.raspberrypi.com/documentation/computers/config_txt.html#boot-options)
 * [Bootloader EEPROM](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-boot-eeprom)
 * [Bootloader configuration](https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#raspberry-pi-bootloader-configuration)
-* [Updating the Compute Module 4 bootloader](https://www.raspberrypi.com/documentation/computers/compute-module.html#cm4bootloader)
+* [Updating the Compute Module 4 bootloader](https://www.raspberrypi.com/documentation/computers/compute-module.html#update-the-compute-module-bootloader)
 * [Releases and release notes](releases.md)

firmware-2711/old/critical/pieeprom-2020-04-16.bin

@@ -1 +0,0 @@
-../beta/pieeprom-2020-04-16.bin

firmware-2711/old/critical/vl805-000137ad.bin

@@ -1 +0,0 @@
-../beta/vl805-000137ad.bin

firmware-2711/old/stable/pieeprom-2020-04-16.bin

@@ -1 +0,0 @@
-../beta/pieeprom-2020-04-16.bin

firmware-2711/old/stable/vl805-000137ad.bin

@@ -1 +0,0 @@
-../beta/vl805-000137ad.bin

firmware-2711/release-notes.md

@@ -1,5 +1,79 @@
 # Raspberry Pi4 bootloader EEPROM release notes
 
+## 2024-10-21: Fix PCIe BAR issue for some switches  (latest)
+
+* Boot-menu improvements
+  Remain in the forced boot mode until the menu is used to select a different
+  boot-mode or reset to the original boot-order.
+
+## 2024-10-10: Use soft-reset to preseve SDRAM contents after ramoops (latest)
+
+* SD card high-speed/low-voltage mode can only be exited by powercycling.
+  Pi 4s before rev 1.4 lack the power switch required to do this, so must
+  resort to a global reset that turns off many things, including SDRAM.
+
+  To ensure correct operation, the bootloader checks that the SD I/O
+  voltage is the expected 3.3V, forcing a power cycle if it isn't.
+  However, this doesn't take advantage of presence of the dedicated SD
+  power switch, always forcing a global reset, a consequence of which can
+  be the loss of SDRAM content - including any ramoops dump of the crash
+  logs.
+
+  Make the bootloader more SD_PWR_ON aware, only triggering a global reset
+  if one isn't found.
+  See: https://github.com/raspberrypi/linux/issues/5298
+* Remove requirement for GPT ptable array  to be at LBA-2
+  See: https://github.com/raspberrypi/rpi-eeprom/issues/585
+* Introduce a new boot-menu feature where pressing SPACE at power on
+  gives the user a one-shot option to select a different boot mode.
+  e.g. Select USB boot if the default SD card is corrupted or unavailable.
+* Display the bootloader network-install UI for longer on a cold boot to make
+  this feature more visible to first time users.
+  To revert to the previous behaviour remove NET_INSTALL_AT_POWER_ON=1
+  from the bootloader config.
+* Default to 2GB start for PCI bus addresses on 2711 and 2712
+  This change also constrains the window size to 2GB, so all PCI bus address
+  assignments fall below 4GB, avoiding a potential bug with 32-bit BARs in
+  esoteric bus topologies (e.g. lots of GPUs).
+
+## 2024-09-05: Fix self-update if EEPROM is write-protected (latest)
+* arm_dt: Consult the hat_map for all HATs
+* USB boot - ignore RP2 / RP3 MSD device in BOOTSEL mode.
+* recovery.bin - Fix erase_eeprom to not block reboot_recovery
+* Fix self-update to continue to boot instead of retrying forever
+  if the EEPROM is write protected.
+  https://github.com/raspberrypi/rpi-eeprom/issues/597
+
+## 2024-08-14 (recovery.bin) -  Add support for OTP metadata (latest)
+* Update to recovery.bin to output metadata about OTP during rpiboot
+
+## 2024-07-30 - USB boot fixes for CM4-S and interop improvements (latest)
+  * Resolve USB boot regression in 2024-04-17 relase on CM4S
+    See https://github.com/raspberrypi/rpi-eeprom/issues/588
+  * Improve compatibility for booting from some USB SD card readers
+    https://github.com/raspberrypi/rpi-eeprom/issues/527
+
+## 2024-07-05 (recovery.bin) - Enable program_rpioboot_gpio - (latest)
+  * Enable the usage of program_rpiboot_gpio in config.txt for recovery.bin
+    without requiring secure-boot to be enabled.
+    This may be useful CI systems provisioning images on Pi4B / Pi400
+    via RPIBOOT.
+    This is an OTP setting and cannot be reverted after programming.
+
+    See https://www.raspberrypi.com/documentation/computers/config_txt.html#program_rpiboot_gpio
+
+## 2024-05-17 - Ignore bootloader updates for Pi5 on Pi4 - (latest)
+  * Add timestamps to UART log messages.
+  * Add support for [tryboot] conditional the bootloader EEPROM
+    config file.
+    See: https://github.com/raspberrypi/rpi-eeprom/issues/454
+  * Fix MAX_RESTARTS parameter
+    See: https://github.com/raspberrypi/rpi-eeprom/issues/576
+  * Add recovery_reboot option to config.txt for rpiboot which causes
+    the system to reboot after updating the bootloader.
+  * Improve secure-boot OTP provisioning logging.
+  * Fix setting to enable secure-boot mode on Pi4B
+
 ## 2024-04-17 - Build Pi4 firmware from the mainline branch - STABLE
   * Switch to building the Pi4 firmware from the common Pi4/Pi5
     mainline release. This doesn't change the Pi4 features