image: 2712: Update config for POWER_OFF_ON_HALT and NET_INSTALL_AT_POWER_ON

* The 2024-11-12 automatically sets the POWER_OFF_ON_HALT property according to the board-type so remove the override network install images. * Set NET_INSTALL_AT_POWER_ON=1 by default which briefly display the network-install / boot-menu UI after a cold power-on. This can be switched off by removing the line either via "rpi-eeprom-config --edit" or the new menu in raspi-config Advanced Options.
imager: remove unused boot-conf-default.txt files
2026-01-21 05:47:47 +08:00 · 2024-11-22 18:08:42 +00:00 · 2024-11-22 18:08:42 +00:00 · 2024-11-22 17:08:35 +00:00 · 2024-11-12 18:10:45 +00:00 · 2024-11-12 18:10:45 +00:00
17 changed files with 28 additions and 15 deletions
--- a/firmware-2712/default/pieeprom-2024-11-12.bin
+++ b/firmware-2712/default/pieeprom-2024-11-12.bin
--- a/firmware-2712/default/recovery.bin
+++ b/firmware-2712/default/recovery.bin
--- a/firmware-2712/latest/pieeprom-2024-11-12.bin
+++ b/firmware-2712/latest/pieeprom-2024-11-12.bin
--- a/firmware-2712/latest/recovery.bin
+++ b/firmware-2712/latest/recovery.bin
--- a/firmware-2712/old/default/pieeprom-2024-09-23.bin
+++ b/firmware-2712/old/default/pieeprom-2024-09-23.bin
--- a/firmware-2712/old/latest/pieeprom-2024-09-23.bin
+++ b/firmware-2712/old/latest/pieeprom-2024-09-23.bin
--- a/firmware-2712/old/latest/pieeprom-2024-10-10.bin
+++ b/firmware-2712/old/latest/pieeprom-2024-10-10.bin
--- a/firmware-2712/old/latest/pieeprom-2024-10-21.bin
+++ b/firmware-2712/old/latest/pieeprom-2024-10-21.bin
--- a/firmware-2712/old/latest/pieeprom-2024-11-05.bin
+++ b/firmware-2712/old/latest/pieeprom-2024-11-05.bin
--- a/firmware-2712/old/latest/pieeprom-2024-11-12.bin
+++ b/firmware-2712/old/latest/pieeprom-2024-11-12.bin
--- a/firmware-2712/release-notes.md
+++ b/firmware-2712/release-notes.md
@@ -1,5 +1,26 @@
 # Raspberry Pi5 bootloader EEPROM release notes

+## 2024-11-12: Promote 2024-11-12 to default release (default)
+
+* Promote 2024-11 to the default release and archive older versions.
+
+## 2024-11-12: Enable initial_turbo=60 by default (latest)
+
+* net-install: Fix keyboard detection on hubs
+* recovery: Always enable UART debug output on 2712
+* Set POWER_OFF_ON_HALT defaults
+  The default value for POWER_OFF_ON_HALT on CM5 and Pi 500 will be 1.
+  Pi5 defaults to 0 for backwards compatibility.
+* boot-time: Remove unnecessary 1 second delay when configuring DWC2 controller.
+* Enable initial_turbo=60 by default
+  This reduces the time to get load and decompress the kernel.
+* logging: Remove superfluous newline on SDRAM refresh changed messages
+* Fix initial_turbo duration
+  The timeout counter for the previous implementation could run too quickly
+  causing the initial-turbo timeout to end earlier than expected.
+* rp1-fw: Add the mailbox firmware interface, and PIO support that uses it.
+* rp1-fw: Turn off unused 25MHz Ethernet refclk
+
 ## 2024-11-07: recovery.bin - Update default release to latest version (default)

 * Update recovery.bin to the most recent version required for CM5 and Pi500.
--- a/imager/.gitignore
+++ b/imager/.gitignore
@@ -0,0 +1,4 @@
+images-2711/
+images-2712/
+release-2711/
+release-2712/
--- a/imager/2711-config/boot-conf-default.txt
+++ b/imager/2711-config/boot-conf-default.txt
@@ -1,6 +0,0 @@
-[all]
-BOOT_UART=0
-WAKE_ON_GPIO=1
-ENABLE_SELF_UPDATE=1
-BOOT_ORDER=0xf41
-
--- a/imager/2712-config/boot-conf-default.txt
+++ b/imager/2712-config/boot-conf-default.txt
@@ -1,4 +0,0 @@
-[all]
-BOOT_UART=1
-BOOT_ORDER=0xf461
-POWER_OFF_ON_HALT=0
--- a/imager/2712-config/boot-conf-network.txt
+++ b/imager/2712-config/boot-conf-network.txt
@@ -1,5 +1,4 @@
 [all]
 BOOT_UART=1
 BOOT_ORDER=0xf21
-POWER_OFF_ON_HALT=0
-
+NET_INSTALL_AT_POWER_ON=1
--- a/imager/2712-config/boot-conf-sd.txt
+++ b/imager/2712-config/boot-conf-sd.txt
@@ -1,4 +1,4 @@
 [all]
 BOOT_UART=1
 BOOT_ORDER=0xf461
-POWER_OFF_ON_HALT=0
+NET_INSTALL_AT_POWER_ON=1
--- a/imager/2712-config/boot-conf-usb.txt
+++ b/imager/2712-config/boot-conf-usb.txt
@@ -1,5 +1,4 @@
 [all]
 BOOT_UART=1
 BOOT_ORDER=0xf146
-POWER_OFF_ON_HALT=0
-
+NET_INSTALL_AT_POWER_ON=1
Author	SHA1	Message	Date
Tim Gover	eefb7b83bc	image: 2712: Update config for POWER_OFF_ON_HALT and NET_INSTALL_AT_POWER_ON * The 2024-11-12 automatically sets the POWER_OFF_ON_HALT property according to the board-type so remove the override network install images. * Set NET_INSTALL_AT_POWER_ON=1 by default which briefly display the network-install / boot-menu UI after a cold power-on. This can be switched off by removing the line either via "rpi-eeprom-config --edit" or the new menu in raspi-config Advanced Options.	2024-11-22 18:08:42 +00:00
Tim Gover	85e8a5924c	imager: remove unused boot-conf-default.txt files	2024-11-22 18:08:42 +00:00
Tim Gover	d2f255b464	pieeprom: 2024-11-12-2712: Promote 2024-11-12 to default release (default) * Promote 2024-11-12 to the default release and archive older versions.	2024-11-22 17:08:35 +00:00
Tim Gover	cc0ad4698e	imager: gitignore: Ignore the imager build directories	2024-11-12 18:10:45 +00:00
Tim Gover	96349fe65c	pieeprom: 2024-11-12-2712: Enable initial_turbo=60 by default (latest) * net-install: Fix keyboard detection on hubs * recovery: Always enable UART debug output on 2712 * Set POWER_OFF_ON_HALT defaults The default value for POWER_OFF_ON_HALT on CM5 and Pi 500 will be 1. Pi5 defaults to 0 for backwards compatibility. * boot-time: Remove unnecessary 1 second delay when configuring DWC2 controller. * Enable initial_turbo=60 by default This reduces the time to get load and decompress the kernel. * logging: Remove superfluous newline on SDRAM refresh changed messages * Fix initial_turbo duration The timeout counter for the previous implementation could run too quickly causing the initial-turbo timeout to end earlier than expected. * rp1-fw: Add the mailbox firmware interface, and PIO support that uses it. * rp1-fw: Turn off unused 25MHz Ethernet refclk	2024-11-12 18:10:45 +00:00